Philips 109B61 manual Video cable, proper grounding adapter not supplied

ENGLISH

Video cable

Connecting the Video Cable: The monitor comes with a built-in video cable. Plug the signal cable's 15-pin connector into the computer's video port and tighten the two screws on the cable connector.

Caution:Don’t bend the signal cable, otherwise it will break the inner wire.

Connecting the Power Cord: Plug the power cord into the monitor's AC power socket. Then plug the power cord into a grounded AC outlet or UL- approved power strip or the power output socket on your PC.

Caution: If the AC outlet is not grounded (with three holes), install the

proper grounding adapter (not supplied).

1

	2
Figure 2	Connecting Cables
1. Power Cord	2. Signal Cable

4

Philips_manual_

Tuesday, November 18, 2003 3:00:46 PM