Auto Program (Setting TV Channels)
9
Your TV can set itself for local area (or
Cable TV) channels. This makes it
easy for you to select only the TV stations
in your area when you press CH +/-.
Connect an Antenna or Cable TV signal
before starting AUTOPROGRAM. Details
are on panels 1-2.
1Press MENU to see the menu.
2Press 8or 9to scroll through
the menu until SETUP is high-
lighted.
3Press :to enter the SETUP
menu.
4Press 8or 9to scroll through
the SETUP menu until AUTO
PROGRAM is highlighted.
5Press :to start scanning and
memorizing channels.
When Auto Programming is
complete, CHANNELS ARE SET
will appear on the screen. Then
the SETUP menu will reappear
briefly.
6Press STATUS/EXIT to
remove the on-screen menu.
Press the CH +/- buttons to see
which channels are in the TV’s
memory.
To delete unwanted channels from
the TV’s memory, see CHANNEL
EDIT on panel 10.
Helpful Hints
789
EXIT
VOL+
6