Your television comes with an onscreen clock. During normal
operation the clock appears on the screen when the STATUS/EXIT but- ton is pressed or when channel changes occur.
BEGIN
Press the CLOCK button on
the remote to display the onscreen CLOCK menu.
Press the CURSOR UP ▲ OR CURSOR DOWN ▼ buttons until the words SET CLOCK are high-
lighted.
Enter the current time using the NUMBERED buttons. If the first number is a single digit first enter a zero then the digit (i.e.,
SETTING THE TV’S CLOCK
SET CLOCK | - |
TIMER ACTIVE | ON |
CHANNEL | 12 |
SET CLOCK | 10:00 AM |
TIMER ACTIVE | ON |
CHANNEL | 12 |
press “0”, then press “8”).
Press the CURSOR RIGHT ▶ or CURSOR LEFT ◀ buttons to
set either AM or PM time.
Note: The CLOCK onscreen menu can also be accessed through the main menu by pressing the MENU
button; then scrolling up/down with the CURSOR UP ▲ or CURSOR DOWN ▼ buttons until
the word CLOCK is highlighted.
Press the CURSOR RIGHT ▶
button to activate the CLOCK menu and follow the steps above to set the time.
1
CC | CLOCK | SLEEP |
3 1 2 3
4 | 5 | 6 | |
7 | 8 | 9 | |
A/CH | 0 | 2 | |
SURF | |||
| |||
|
| STATUS | |
MENU |
| EXIT |
4
VOL | CH |
MUTE
SMART SMART
Note: If a power failure occurs, the TV's CLOCK will have to be reset.
If no time is set, the time will not appear onscreen.
SMART HELP
Remember: Be sure to 
press “0” first and then the
hour number for single digit entries.
To clear the onscreen menu press the STATUS/EXIT button or wait a few seconds after you have fin- ished your adjustment and the menu will automatically disappear from the screen.
SOUND PICTURE
18
