Manual TV channel search
In certain cases the ’Automatic TV channel search’ may not be able to find all of the TV channels (e.g. coded TV channels). In that case, use this manual method to set the channels.
aPress the MENU button on the remote control. The main menu will appear.
b Select the line ’Installation’ with the P rB or
AP q button and confirm with the SqC button.
c Select the line ’Manual store’ with the P rB or AP q button and confirm with the SqC button.
iIf you want to change the automatic tv channel setting, select the line ’Fine tuning’.
With the DSr or SqC button you can vary the automatic tv channel setting. Important: This
jPress the OK button to store the TV channel.
If you want to search for further TV channels, start again at step e.
k To end, press the MENU button.
MANUAL STORE
Channel/Frequency FREQU.
Search125
Fine tuning (,,,,,,n=,,,,,,$
Name edit | xxx |
Programme number | 01 |
Decoder | OFF |
ã Exit: |
|
« press MENU |
|
Satellite receiver
You can receive channels from the satellite receiver via the scart socket EXT.1 .
To do this, select the channel number ’E1’ with the button. You will have to select the channels to be
received by the satellite receiver on the receiver itself.
dIn the line ’Channel/Frequency’, select the display for:
’FREQU.’: frequency
’C CH’: channel
’S CH’: special channel
eIf you know the frequency or channel of the desired TV channel, you can enter the data in line ’Search’ with the digit buttons
If you don’t know the frequency or channel of the TV channel of your choice, press the SqC button to start the channel search.
fIn the line ’Programme number’ select the programme number you want e.g.: ’01’, using the DSr or SqC button.
gIf you want to change the TV channel name, press the SqC button in line ’Name edit’.
Select the letter or number you want to change with the DSr or SqC button. Change it with the
P rB or the AP q button. Select the next letter or number in the same way.
hPress the made.
OK
button to store the changes you have
6
