Picture interference
When the picture quality is poor when you play a cassette,
please follow these instructions.
Tracking during playback
aDuring playback, press the MENU button.
bSelect the line ’Tape’ with the buttons PrB or
APqand confirm with the SqC button.
cSelect the line ’Tracking’ with the buttons PrB or
APq.
dHold the buttons DSr or SqC until the playback
quality is at its best.
eConfirm with the OK button.
fTo end, press the MENU button. This setting will remain
until you remove the cassette.
Tracking during still picture
If the still picture vibrates vertically,you can improve the still
picture as follows:
aDuring still picture, press the MENU button.
bSelect the line ’Tape’ with the PrB button or
APqand confirm with the SqC button.
cSelect the line ’Jitter’ with the PrB or APq
button.
dHold the DSr or SqC button until the picture
quality is at its best.
eConfirm with the OK button.
fTo end, press the MENU button.
DPlease note, however, that interference may still
occur with poor quality cassettes.
Cleaning the video heads
If horizontal lines appear on the screen when you play a
cassette, you should clean the video heads.
aDuring playback, press the MENU button.
bSelect the line ’Tape’ with the buttons PrB or
APqand confirm with the SqC button.
cSelect the line ’Cleaning’ with the buttons PrB or
APq.
dPress the OK button. ’CLEANING’ will appear on the
screen.
eWait a few seconds, until the message disappears and
then press the MENU button.
13