5
1Insert a cassette into the cassette slot.
2Press the GPLAY playback button.
3Picture search: Now press the H(rewind) or I
(wind) button once or several times.
4Interrupt: Press the STOP hbutton.
5Wind: Stop the tape and press the H(rewind) or the
I(wind) button.
6Eject: Press the Jbutton on the set.
Note: Some functions switch off automatically after a
while (e.g.: Pause, Still Picture, Scanning).This helps to
protect the cassette and prevent unnecessary power
consumption.
* With this set you can play back cassettesthat have
been recorded on another TV Combi in the NTSC
standard.
* If you load a cassette with erase protection, the TV
Combi starts playback automatically.
* The picture quality is affected during scanning. The
sound is switched off.
* Remove the cassette beforetransporting the TV
Combi.
Still picture
1Press the STILL Rbutton. You see a still picture.
Interference stripes will appear.
Each time you press the STILL Rbutton again the pic-
ture will move on one step.
Continuous playback
1Press the MENU button.
2Select and confirm the ’SPECIAL’ line.
3Select the ’REPEAT PLAY’ line. Switch on the continuous
playback.
4Press the MENU button.
5Start the continuous playback with the GPLAY playback
button.
6If you want to cancel the function, stop the continous
playback in the ’REPEAT PLAY’ line.
Tape position/Index search
Tape position: If you press the OK button the tape position
will be shown in the display during Wind, Rewind, Record,
Playback and Pause/Stop.
Index search: Every time you startto record, the tape is
marked with a code mark.
1Press the INDEXEbutton. Press the Ibuttonto
select the next code mark or the Hbutton for the
previous code mark.
2Once the TV Combi finds the code mark or unrecorded
area it will automaticallyswitch to playback.
Note: When you press any tape transportbutton (e.g.:
the Hor Ibutton) this search function will be
stopped.
* You cannot use this function with recordings made on
another video recorder that does not have this function.
Eliminating picture interference
1During playback press the MENU button.
2Select and confirm the ’SPECIAL’ line.
3Select the ’TRACKING’ line.
4Press the Dor Cbutton until the playback
qualityis at its best.
5Press the MENU button.This setting will remain until
you remove the cassette.
6Cleaning function: Press the MENU button.
7Select and confirm the ’SPECIAL’ line.
8Select the ’CLEANING’ line.
9Press the OK button. A blue screen appears for a few
seconds.
0Wait until the blue screen disappears and press the
MENU button.
Note:
* Some hired cassettes mayhave a poor picture/sound
quality. This is not a fault in your set.
2. PLAYBACK