9
3Select ’SLEEPTIMER’ line.
4With the Dor the Cbutton you can determine
the minutes left until switch off in 15 minutes intervals.
When you set the time to ’0’ with the CLEAR button the
sleep function is switched off.
5Press the MENU button.
Switch set on function
You can programme your setto switch on at a predetermined
time.
1Press the MENU button.
2Select and confirm the ’FEATURES’ line.
3Select and confirm the ’ON TIMER’ line.
4Determine the time you wishthe set to switch on.
5Select the ’WAKE UP’ line and switch the ’on-timer’on or
off.
6Press the MENU button.
7Press the STANDBYmbutton.
Child lock
1Press the MENU button.
2Select and confirm the ’FEATURES’ line.
3Select the ’CHILD LOCK’ line.
4Switch the child lock on or off.
5Press the MENU button.
Note: If a button is pressed with the child lock ’on’,
’CHILD LOCK’ appears for a few seconds in the display.
* Programmed recordingsare made despite the child
lock and cannot be interrupted.
Manual channel search
In certain cases the Automaticchannel search may not be
ableto find all of the TV channels (e.g.: coded TV channels).
You can then use this manual method to set the channels.
1Switch on the set with the STOPhbutton. Press the
menu buttons Dand Csimultaneously.
2Select and confirm the ’MANUAL STORE’ line.
MANUALSTORE vw
CHANNEL/FREQ.
SEARCH C-21
FINETUNING
PROGRAMMENR. 1
DECODER
STORE
3Select the ’SEARCH’ line.
4Press the Cbutton as often as necessary, until you
have found the right TV channel.
Note:
* If you want to allocate a decoder, switch the decoder
function on or off with the Dor Cbutton in the
’DECODER’ line.
* If you want to change the automatic channel setting,
select the ’FINE TUNING’ line.
With the Dor Cbutton you can vary the auto-
matic TV channel setting.
Important: This re-tuning is only necessary and useful in
special cases, e.g.: when there are stripes on the
picture with cable-TV systems.
5In the ’PROGRAMME NR.’ line use the Ppbuttonto
select the required programme number, e.g.: ’P 01’ .
6Select and confirm the ’STORE’ line.
7If you want to search for further TV channels, start again
at step 4.
To finish, press the MENU button twice.