Automatic search for a tape position(index search)
At the start of each recording, the TV-VIDEO Combi will write
an index code on the tape.
aPress the INDEXEbutton. Press the Ibutton to
select the next code mark or the Hbutton for the
previous code mark.
bWhen the TV-VIDEO Combi finds the code mark, it will
automatically switch to play.
Picture interference
When the picture quality is poor when you playa cassette,
please follow these instructions.
Tracking during playback
aDuring playback, press the MENU button.
bSelect the line ’Tape’ with the menu buttons APqor
PrB and confirm with the SqC button.
cSelect the line ’Tracking’ with the menu buttons
APqor PrB .
dHold the menu buttons DSr or SqC until the
playback quality is at its best.
eConfirm with the OK button.
fTo end, press the MENU button. This setting will remain
until you remove the cassette.
Tracking during still picture
If the still picture vibrates vertically,you can improve the still
picture as follows:
aDuring still picture, press the MENU button.
bSelect the line ’Tape’ with the APqbutton or
PrB and confirm with the SqC button.
cSelect the line ’Jitter’ with the APqor PrB
button.
dHold the DSr or SqC button until the picture
quality is at its best.
eConfirm with the OK button.
fTo end, press the MENU button.
DPlease note, however, that interference may still
occur with poor quality cassettes.
Cleaning the video heads
If horizontal lines appear on the screen when you play a
cassette, you should clean the video heads.
aDuring playback, press the MENU button.
bSelect the line ’Tape’ with the menu buttons APqor
PrB and confirm with the SqC button.
cSelect the line ’Cleaning’ with the menu buttons
APqor PrB .
dPress the OK button. ’CLEANING’ appears on the
screen.
eWait a few seconds, until the message disappears and
then press the MENU button.
13