DUnder ’VPS/PDC’, use the APqor PrB
button to switch ’VPS or PDC’ on or off.
fConfirm with the OK buttonwhen the information is
correct.
gConfirm the message on the screen with the OK button.
A TIMER recording can only start, if theset is not used for
other video recorder functions (e.g. playback).
DThe programming information has been stored in a
TIMER block.
hTo end, press the TIMERkbutton.
iMake sure that the cassette you have put in can be
recorded on.
How to check or change a TIMER
aPress the TIMERkbutton on the remote control.
bSelect the line ’Timer programming’ with the
buttons APqor PrB and confirm with the
SqC button.
cSelect the TIMER you want to check or change with the
APqor PrB button and confirm with the OK
button.
dSelect the entry field with the DSr or SqC
button.
eChange any information with the APqor PrB
button or with the 0-9 buttons.
DUnder ’LP’, use the APqor PrB button to
select the recording speed ’SP’ or ’LP’.
fConfirm with the OK button.
gTo end, press the TIMERkbutton.
hMake sure that the cassette you have put in can be
recorded on.
How to clear a TIMER
aPress the TIMERkbutton on the remote control.
bSelect the line ’Timer programming’ with the
buttons APqor PrB and confirm with the
SqC button.
cSelect the TIMER you want to clear with the buttons
APqor PrB .
dPress the CLEAR button.
eSwitch off with the TIMERkbutton.
18