Philips 150B Smart, Help, Return To Top Of The Page, VIDEO NOISE not available on all models

The OSD Controls

5)When finished with BRIGHTNESS, press the button until CONTRAST is highlighted. Next, press the or button to adjust the contrast. A 50% contrast is recommended.

6) Press the button to confirm your selection and return to the MAIN CONTROLS window. CLOSE

MAIN CONTROLS is highlighted.

	Smart Help
	After returning to MAIN CONTROLS…
Smart	… to continue to VIDEO NOISE, press the		button until VIDEO NOISE is
Help	highlighted. Next, follow steps 3 - 6 under VIDEO NOISE. (Note: VIDEO NOISE is not
	available on all models. If not on your MAIN CONTROLS window, continue on to OSD
	SETTINGS.)
	… to exit completely, press the	button.

RETURN TO TOP OF THE PAGE

VIDEO NOISE (not available on all models)

VIDEO NOISE is composed of two steps, PHASE and CLOCK. PHASE adjustment reduces the horizontal flicker of characters on the screen. CLOCK adjustment reduces the vertical flicker of characters on the screen.

To adjust Phase and Clock, follow the steps below. If VIDEO NOISE is not available on your monitor, continue on to OSD SETTINGS. Note: Before adjusting VIDEO NOISE yourself, press the AUTO button on the front panel. If there is no improvement, then return to adjust PHASE and CLOCK.

1)Press the button on the monitor. The MAIN CONTROLS window appears. LANGUAGE is

file:///E/Potomac/english/150b/osd/osd_cont.htm (6 of 16) [4/19/2000 4:42:28 PM]