Philips 150P2E/150P2D user manual Video, Resolution & Preset Modes

150P2E/150P2D Product Information

VIDEO

• Video dot rate	80 MHz
• Input impedance
- Video	75 ohm
- Sync	2 kOhm
• Input signal levels	700m Vpp
• Sync input signal	Separate sync
	Composite sync
	Sync on Green
• Sync polarities	Positive and negative
	XGA Hsync	48- 61 KHz, Vsync 60 - 76 Hz (N.I.)
• Input Frequency	SVGA Hsync	35- 50 KHz, Vsync 56 - 75 Hz (N.I.)
	VGA Hsync	31- 38 KHz, Vsync 60 - 76 Hz (N.I.)

• Video interface	Dual input: Both Analog (D-Sub) and DVI-D (Digital only) are
	available It can be switching via OSD selection.

OPTICAL CHARACTERISTICS

• Contrast ratio	300 (typ.)
• Brightness	250 cd/m2 (typ.)
• Peak contrast angle	6 o'clock
• White Chromacity	x: 0.281 y: 0.311 (at 9300° K) x: 0.312 y: 0.338 (at 6500° K)
	Upper >55° (typ.)
• Viewing Angle (C/R >5)	Lower >60° (typ.)
	Left >75 ° (typ.)

Right >75 ° (typ.)

• Response time <=45ms (typ.)

* These information are subject to change without notice.

RETURN TO TOP OF THE PAGE

Resolution & Preset Modes

• Maximum 1024 x 768 at 75Hz

file:///D/Grace/150P2/english/150p2e/product/product.htm (2 of 8) [8/9/2001 11:25:22 AM]