Philips 150T4 manual Automatic tuning, Manual tuning

Using other menus (AP)

5.Use , to highlight EXIT and then press to exit from the menu.

RETURN TO TOP OF THE PAGE

Automatic tuning

This menu allows you to automatically search for all the programmes available in your region (or on your cable network).

1.Press to activate the menu.

2.Use , to scroll the highlight INSTALL, and then press .

3.Use , to scroll the highlight AUTO STORE, and then press to activate the automatic searching. After several minutes, the INSTALL menu reappears automatically.

4.The programmes found will be numbered in ascending order starting at 0, 1, 2, etc. Use the SKIP menu to enable or disable the programmes which you want it to be skipped. When you use P UP/DOWN to access programme, all disable programmes will be skipped.

RETURN TO TOP OF THE PAGE

Manual tuning

This menu allows you to store the programmes one by one by hand.

1.Press to activate the menu.

2.Use , to scroll the highlight INSTALL, and then press .

3.Use , to scroll the highlight MANUAL STORE, and then press .

4.Use , to scroll the highlight SEARCH and press .The search begins.

As soon as a programme is found, the search will stop. If you know the frequency of the programme required, enter its number directly using the 0, 9 keys and go to step 6.

5.If reception is unsatisfactory, select FINE TUNE and hold down or key.

6.Select PROG. NO (programme number) and use the or to change the desired number.

7.Select STORE and press . The message STORED appears. The programme is stored.

file:///D/My%20documents/dfu/B2C_TV/ENGLISH/150T4/osd/tv_ap.htm (4 of 5) [3/2/2004 3:44:35 PM]