Philips 150X3M user manual Audio

Product Information

•Video dot rate

•Input impedance

-Video

-Sync

•Input signal levels

•Sync input signal

•Sync polarities

•Input Frequency

•Video interface

AUDIO

•Input signal level

•Headphone out signal level

•Input signal connector

•Loudspeaker

80 MHz
75 ohm
5K6 ohm
700m Vpp
Separate sync
Composite sync
Sync on Green
Positive and negative
XGA Hsync	48- 61 kHz, Vsync 60 - 76 Hz (N.I.)
SVGA Hsync	35- 50 kHz, Vsync 56 - 75 Hz (N.I.)
VGA Hsync	31- 38 kHz, Vsync 60 - 76 Hz (N.I.)

Dual input: Both Analog (D-Sub) and DVI-D (Digital only) are available. It can be switching via OSD selection.

0.7 Vpp

32 Ohm 20+20mW 3.5mm mini jack

4W Stereo Audio (2W/channel RMS x2, 200 Hz -12 kHz, 8 ohm, THD=10%)

MICROPHONE

• Sensitivity	-55dB re 1V/ubar at 1kHz
• Output impedance	2.2K Ohm max.
• Directivity	-5dB at 180°
• Frequency range	300Hz-3kHz

OPTICAL CHARACTERISTICS

• Contrast ratio	400 (typ.)
• Brightness	250 cd/m2 (typ.)
• Peak contrast angle	6 o'clock
• White Chromacity	x: 0.281 y: 0.311 (at 9300° K) x: 0.312 y: 0.338 (at 6500° K)

file:///D/03771/english/150x3m/product/product.htm (2 of 7) [9/13/2002 1:48:21 PM]