Connecting peripheral equipment
Video recorder
Other equipment
Amplifier
Carry out the connections shown opposite, using a good quality euroconnector cable.
If your video recorder does not have a euroconnector socket, the only connection possible is via the aerial cable.You will therefore need to tune in your video recorder's test signal and assign it programme number 0 (refer to manual store, p. 5).
To reproduce the video recorder picture, press 0.
Video recorder with decoder
Connect the decoder to the second euroconnector socket of the video recorder.You will then be able to record scrambled transmissions.
Satellite receiver, decoder, games, etc.
Make the connections as shown opposite.
To connect a
-the ”L” and”R” outputs of the TV set to an ”AUDIO IN” ”L” and ”R” of the
-The ”PCM” output of the TV set to a ”DIG IN” input of the amplifier (amplifier with digital coaxial input).
Side connections
4 5 6
7 8 9
Ø 0 Á
Make the connections as shown opposite.
Headphones
When headphones are connected, the sound on the TV set will be cut.The @”# keys are used to adjust the volume level.
The headphone impedance must be between 32 and 600 Ohms.
To select connected equipment
Press the n key to select EXT and AV for the side connections. Most equipment (decoder, video recorder) carries out the switching itself.
13
