Tips
Poor reception | The proximity of mountains or high buildings may be responsible for ghost |
| pictures, echoing or shadows. In this case, try manually adjusting your |
| picture : see Fine Tuning (p.5) or modify the orientation of the outside |
| aerial. |
| Does your antenna enable you to receive broadcasts in this frequency range |
| (UHF or VHF band) ? |
| In the event of difficult reception (snowy picture) switch the NR on the |
| Picture menu to ON (p. 6). |
|
|
No picture | Have you connected the aerial socket properly ? |
| Have you chosen the right system ? (p. 5). Poorly connected euroconnector |
| cables or aerial sockets are often the cause of picture or sound problems |
| (sometimes the connectors can become half disconnected if the TV set is |
| moved or turned). Check all connections. |
|
|
Peripheral | To play a video cassette, check that it has been recorded under the same |
equipment gives a | standard (PAL, SECAM, NTSC) which can be replayed by the video |
black and white | recorder. |
picture |
|
|
|
The remote control | Check that the mode selector on the side of the remote control is set to |
no longer works | TV. |
|
|
No sound | If on certain channels you receive a picture but no sound, this means that |
| you do not have the correct TV system. Modify the System setting (p. 5). |
|
|
Teletext | Are certain characters not displayed correctly ? Check that the Country |
| setting has been positioned correctly (p.4). |
|
|
Does the DVD | Check that the disc does not have any fingerprints on it. Clean it with a soft |
player no longer | cloth, wiping from the centre to the edge. |
work ? |
|
|
|
Remote control | The TV set does not react to the remote control ; the indicator on the set |
| no longer flashes when you use the remote control ? Replace the batteries. |
|
|
Standby | When you switch the TV set on it remains in standby mode and the |
| indication Locked is displayed when you use the keys on the TV set ? |
| The Child Lock function is switched On (p. 7). |
| If the set receives no signal for 15 mins, it automatically goes into standby |
| mode. |
| To save power, your set is fitted with components that give it a very low power |
| consumption when in standby mode (less than 3 W). |
|
|
|
|
Still no results ?
Cleaning the set
If your TV set breaks down, never attempt to repair it yourself : contact your dealer's
Only use a clean, soft and
14
