Troubleshooting
Horizontal flicker appears
The screen is too bright or too dark
An after-image appears
An after-image remains after the power has been turned off.
Green, red, blue, dark, and white dots remains
●Press the Auto button.
●Eliminate the vertical bars using the Phase/Clock of More Settings in OSD Main Controls.
●Adjust the contrast and brightness on
●If an image remains on the screen for an extended period of time, it may be imprinted in the screen and leave an after- image. This usually disappears after a few hours
●This is characteristic of liquid crystal and is not caused by a malfunction or deterioration of the liquid crystal. The after- image will disappear after a peroid of time.
●The remaining dots are normal characteristic of the liquid crystal used in today’s technology.
For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative.
RETURN TO TOP OF THE PAGE
file:///C/Documents and Settings/effie.chen/桌面/Philips/ENGLISH/190EW8/safety/saf_troub.htm (3 of 4)96/6/5 下午 04:25:10
