Philips 19MD350B/F7 user manual  Plug In the AC Power Cord, PC Connection, Resolution

PREPARATION

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

[PC Connection]

This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a PC monitor. Use an VGA cable for this connection and it requires stereo mini-plug audio cable as well.

e.g.)			rear of this unit
	VGA cable should be	VGA cable
	with ferrite core.

personal computer
		stereo mini-plug audio cable
The following signals can be displayed:
Format	Resolution	Refresh rate	Format	Resolution	Refresh rate
VGA	640 x 480	60Hz		1,280 x 768	60Hz
SVGA	800 x 600	60Hz	WXGA
				1,360 x 768	60Hz
XGA	1,024 x 768	60Hz

Other formats or non-standard signals will not be displayed correctly.

Note:

•Please purchase the VGA cable that has a ferrite core.

•The following operations may reduce noise.

-Attach a ferrite core to the AC power cord of your PC.

-Unplug the AC power cord and use the built-in battery of your PC.

Plug In the AC Power Cord

Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are completed.

rear of this unit

AC power cord

AC outlet

Caution:

•Do not connect the AC power cord to a power supply outside the indicated voltage of this unit (AC 120V). Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks.

Note:

• Each time you plugged in the AC power cord, any operations will not be performed for a few seconds. This is not a malfunction.

16

EN