Removable Guide
Comb Attachment
3-Dimensional Rounded
Chromium Steel Cutter Blades
Hair Length Selector
ON/OFF Switch
Charge Indicator Light
Socket for Appliance Plug
Cleaning Brush
Barber’s Comb
Scissors
Outlet Plug
Appliance Plug
• 60-Day
Money-Back Guarantee
• Full Two-Year Warranty
FEATURES
2
1Cordless
1Charge according to directions.
2Unplug cord from outlet and then from unit.
3Slide ON/OFF switch ON and begin trimming.
NOTE:If battery has completely run out, you can
return to corded trimming.Connect cord to Hair
Clipper and turn ON.If Hair Clipper does not start
immediately when plugged in,turn Hair Clipper OFF.
Wait approximately 1 minute.Turn back ON and begin
trimming.
GUIDE COMB ATTACHMENT
The Guide Comb may be removed if you are:
Defining/outlining hair line edges
Trimming nape of neck
Trimming with a comb or fingers
To Remove Guide Comb
1Be certain Hair Clipper is in OFF position.
2Push the Hair Length Selector and slide the Guide
Comb to the last setting,then gently pull off clipper
(Fig.2). Position fingers at base of Guide Comb
Attachment to help remove Guide Comb
To Replace Guide Comb
1Be certain Hair Clipper is in OFF position.
2Slide Guide Comb back on Clipper.
NOTE:The Guide Comb can be placed on the
Hair Clipper only one way.
CHARGING
Use only the cord provided.
1First time charging requires a full 12 hours.
(Re)charge at temperatures between
60°F and 95°F.
Charging at lower or higher temperatures
adversely affects lifetime of battery.
2Slide ON/OFF switch to OFF (Fig.1).
3Connect cord to Hair Clipper.Plug into
120V AC outlet.
4Charging Indicator Light will light to indicate Hair
Clipper is (re)charging.
For the longest battery life,do not charge for more
than 24 hours.However,(re)charging longer than the
required period of time will not harm Hair Clipper.
Recharging
Recharging requires 12 hours for approximately
30 minutes of cordless hair clipping.
If Hair Clipper has not been used for at least a month,
Hair Clipper must be recharged fully before use.
For most efficient battery usage,use Hair Clipper until
the charge completely runs out,then recharge fully.
CORD/CORDLESS TRIMMING
Corded
1Connect cord provided to Hair Clipper.
2Plug into 120V AC outlet.
3Slide ON/OFF switch ON.
Begin trimming.
4When finished,turn hair clipper OFF and unplug.
It is not recommended that this Hair Clipper be
used exclusively as a corded Hair Clipper.Continual
use as a corded Hair Clipper,as well as continually
charging Hair Clipper,will reduce life of battery.