Manual TV channel search
In certain cases the ’Automatic TV channel search’ may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the channels.
aPress the MENU button on the remote control. The main
menu will appear.
bSelect the line ’MANUAL SEARCH’ with the =Pror
;Pqbutton and confirm with the SqP button.
MANUAL SEARCH
PROGRAMME NUMBER WP01 X
FREQUENCY 754
DECODER OFF
EXIT: MENU STORE: OK
cIn the line ’PROGRAMME NUMBER’, select the function
with the buttons QSr or SqP oruse the
number buttons ’ 0..9 ’ on the remote control to select the
desired programme number, e.g.: ’P01’.
dSelect the line ’FREQUENCY’ with the menu buttons
=Pror ;Pq.
eEnter the frequency of the desired TV channel with the
number buttons 0..9 .
DIf you don’t know the frequency of the desired TV
channel, press SqP inline ’FREQUENCY’to
start the automatic search.
Repeat automatic search until you have found the
desired TV channel. A changing frequency number
will appear on the TV screen.
fIf you want to allocate a decoder, in line ’DECODER’
select ’ON’ using the button SqP .
gTo store the TV channel, press OK .’STORED’will
briefly appear on the TV screen.
DIf you would like to search for more TV channels,
start again at step b.
hTo end, press the MENU button.
Satellite receiver
You can receive channels from the satellite receiver via the
scart socket EXT .
aTo do this, select the channel number ’E1’ using the
button 0on the remote control. You will have to select
the channels to be received by the satellite receiver on
the receiver itself.
bUse the number buttons 0..9 on the remote control to
select the channels on the TV-Video Combi.
Special installation functions
You can select one of the following installation functionsin
order to adapt your TV-Video Combi to your own specific
requirements.
Automatic TV channel search (Autoinstall)
Your TV-Video Combi will search for all TV channels. It
arranges them in the following sequence into memory: BBC1,
BBC2, ITV, CH4, CH5, SKY, others.
DWhen you start this function, existing programmed
recordings may be deleted.
DIf you want to start the automatic TV channel search
again, follow the instructions below.
aPress the MENU button on the remote control. The main
menu will appear.
bSelect the line ’AUTO INSTALL’ with the menu buttons
=Pror ;Pq.
cPress the SqP button.’Autoinstall’ starts.
AUTO INSTALL
SEARCHING
ƒƒƒƒƒƒƒ__________________
PLEASE WAIT...
Wait until all TV channels have been found. This can take
several minutes.
7