1. Slide the battery cover off the back of the remote control.
2. Insert the two supplied batteries (Size AAA, Type LR03). Be sure the + and - ends of the batteries line up with the markings inside the case.
3. Slide the cover back into position.
DDNote |
|
Remove the batteries if not using the |
|
remote control for an extended period of | 2. Push the CAM in as far as it will go. |
time. |
EN
4.6Prepare TV for digital services
Scrambled digital TV channels can be decoded with a Conditional Access Module, inserted with a smart card (CAM) provided by a digital TV service operator.
The CAM may enable several digital services, depending on the operator and services you choose (for example, pay TV). Contact your digital TV service operator for more information about services and terms.
4.6.1Using the Conditional Access Module
BBWARNING
Switch off your TV before inserting a CAM. Be sure to follow the instructions described below.Wrong insertion of a CAM may damage both the CAM and your TV.
1.Following the directions printed on the CAM, gently insert the CAM into the Common Interface slot on the side of the TV.
3.Switch on the TV and wait for the CAM to be activated.This may take several minutes.
DDNote
Do not remove the CAM from the slot. Removing the CAM will deactivate the digital services.
4.6.2 Access CAM services
1.Enter Setup menu.
2.Press ï to select OSD display > Enable CI slot.
3.Press Î to select On.
