•Time download
Set the time of the clock display automatically via Teletext.The clock will be automatically synchronised to the correct time.
•Download Program
Select the time from the teletext transmission of a channel. Make this download program the same as the startup channel.
•Time offset
Set the time difference between the time received from Teletext to the current time at your location.
•Buzzer volume
Set the volume of the alarm buzzer.
7.Press ï to select Store - go right and press Æ to save setting.
7.12 Set auto scart
Set the TV to switch to the source where scart signal is detected.
1.Enter Setup menu.
2.Press ï to select Auto scart.
Setup menu |
| Auto scart |
Maximum volume | 100 | AV1 |
Switch on channel |
| Power ON SCART |
Power on |
| Off |
Low power standby |
|
|
Clock |
|
|
Auto scart |
|
|
USB |
|
|
Monitor out |
|
|
3.Press Æ to enter Auto scart.
4.Press Î or ï to select the desired option.
•AV1
Select to switch TV automatically to AV1 when scart cable is connected to the AV1 connector.
•Power ON SCART
Select to switch the TV on from standby
mode when a scart signal is detected or |
|
when no scart signal is detected the TV will | EN |
go to standby mode. | |
• Off |
|
Switch off this feature. |
|
5.Press ï to select Store - go right and press Æ to save setting.
7.13 Set USB break-in
Set the TV to automatically detect USB devices.
1.Enter Setup menu.
2.Press ï to select USB break-in.
Setup menu | USB |
Switch on channel | On |
Power on | Off |
Low power standby |
|
Clock |
|
Auto scart |
|
USB |
|
Monitor out |
|
Blank current Channel |
|
3.Press Æ to enter USB
4.Press Î or ï to select the desired option.
•On
Enable plug and play auto detection of USB devices.
•Off
Disable plug and play auto detection of USB devices.
5.Press ï to select Store - go right and press Æ to save setting.
7.14 Select monitor out
Select to output audio and video from TV via relevant AV connectors.
1.Enter Setup menu.
