Troubleshooting
|
|
|
|
Safety and |
| Troubleshooting |
|
|
|
| |
Troubleshooting |
|
|
|
FAQs |
|
|
|
|
| This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these | |
Common Problems |
| solutions, contact Philips customer service representative. | |
Imaging Problems |
| Common Problems |
|
Regulatory Information |
|
| |
|
|
| |
|
| Having this problem | Check these items |
● Make sure the power cord is plugged into the power outlet
No Picture |
| and into the back of the monitor. | |
● | First, ensure that the power button on the front of the monitor | ||
(Power LED not lit) | |||
| is in the OFF position, then press it to the ON position. | ||
|
|
| ● Make sure the computer is turned on. | |
No Picture | ● Make sure the signal cable is properly connected to your | |
computer. | ||
| ||
(Power LED is white blinking) | ● make sure the monitor cable has no bent pins on the connect | |
side. If yes, repair or replace the cable. | ||
| ||
| ● The Energy Saving feature may be activated | |
Screen says |
| |
| ● Make sure the monitor cable is properly connected to your | |
| computer. (Also refer to the Quick | |
| ● Check to see if the monitor cable has bent pins. | |
| ● Make sure the computer is turned on. |
AUTO button doesn't function in VGA mode
Imaging Problems
Image is not centered
●The auto function is applicable only in
●Press the Auto button.
●Adjust the image position using the Phase/Clock of Setup in OSD Main Controls.
