2. Setting up the monitor

2.4Remove base stand and base (241S4LC/241S4LY)

Remove the base stand

Before you start disassembling the monitor base, please follow the instructions below to avoid damage or injury.

1.Place the monitor face down on a smooth surface, taking care to avoid scratching or damaging the screen.

2.Detach the base stand away from the base column by:

(1)Use your fingers to loosen the screw located at the bottom of the base.

(2)Gently move up-and-down to release the latch that locks the base and pull the base away from the base column.

Remove the base

Condition:

For VESA standard mounting applications

1.Extend the monitor base to its maximum height.

2.Place the monitor face down on a smooth surface, taking care to avoid scratching or damaging the screen.Then lift the monitor stand.

3.While keeping the release button pressed, tilt the base and slide it out.

10

Page 12
Image 12
Philips 241S4L user manual Detach the base stand away from the base column by