bWhen the TV-VIDEO Combi finds the code mark, it will
automatically switch to play.
Picture interference
When the picture quality is poor when you play a cassette,
please follow these instructions.
Tracking during playback
aDuring playback, press the MENU button.
bSelect the line ’Tape’ with the menu buttons Bor
Aand confirm with the Cbutton.
cSelect the line ’Tracking’ with the menu buttons
Bor A.
dHold the menu buttons Dor Cuntil the playback
quality is at its best.
eConfirm with the OK button.
fTo end, press the MENU button. This setting will remain
until you remove the cassette.
Tracking during still picture
If the still picture vibrates vertically,you can improve the still
picture as follows:
aDuring still picture, press the MENU button.
bSelect the line ’Tape’ with the Bbutton or Aand
confirm with the Cbutton.
cSelect the line ’Jitter’ with the Bor Abutton.
dHold the Dor Cbutton until the picture quality is at
its best.
eConfirm with the OK button.
fTo end, press the MENU button.
DPlease note, however, that interference may still
occur with poor quality cassettes.
Cleaning the video heads
If horizontal lines appear on the screen when you play a
cassette, you should clean the video heads.
aDuring playback, press the MENU button.
bSelect the line ’Tape’ with the menu buttons Bor
Aand confirm with the Cbutton.
cSelect the line ’Cleaning’ with the menu buttons
Bor A.
dPress the OK button. ’CLEANING’ appears on the
screen.
eWait a few seconds, until the message disappears and
then press the MENU button.
13