Manual TV channel search
In certain cases the ’Automatic TV channel search’ may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the channels.
aPress the MENU button on the remote control. The main
menu will appear.
bSelect the line ’Installation’ with the Bor
Abutton and confirm with the Cbutton.
cSelect the line ’Manual store’ with the Bor
Abutton and confirm with the Cbutton.
MANUAL STORE
Channel/Frequency FREQU.
TV system PAL I
Search 125
Fine tuning (,,,,,,n=,,,,,,$
Name edit xxx
Programme number 01
Decoder OFF
NICAM ON
ã Exit:
« press MENU
dIn the line ’Channel/Frequency’,select the
display for:
’FREQU.’: frequency
’CCH’: channel
’SCH’: special channel
eIf you know the frequency or channel of the desired TV
channel, you can enter the data in line ’Search’ with
the digit buttons 0-9 .
DIf you don’t know the frequency or channel of the TV
channel of your choice, press the Cbutton to start
the channel search.
fIn the line ’Programme number’ select the
programme number you want e.g.: ’P01’, using the
Dor Cbutton.
gIf you want to change the TV channel name, press the
Cbutton in line ’Name edit’.
ESelect the character you want to change with the Dor
the Cbutton. Change the character with the Bor the
Abutton. Select the next character in the same way.
ETo confirm the information, press the OK button.
hIn the line ’NICAM’, select funtion ’ON’or’OFF’ with
the Cor Dbutton.
iIf you want to change the automatic tv channel setting,
select the line ’Fine tuning’.
With the Dor Cbutton you can vary the automatic tv
channel setting. Important: This re-tuning is only
necessary and useful in special cases, e.g.: when there
are stripes on the picture with cable-TV systems.
jPress the OK button to store the TV channel.
DIf you want to search for further TV channels, start
again at step e.
kTo end, press the MENU button.
Satellite receiver
You can receive channels from the satellite receiver via the
scart socket EXT.1 .
To do this, select the channel number ’E1’ with the qPr
button. You will have to select the channels to be received by
the satellite receiver on the receiver itself.
Special installation functions
You can select one of the following installation functionsin
order to adapt your TV-VIDEO Combi to your own specific
requirements.
Automatic TV channel search
Your TV-VIDEO Combi will search for all TV channels.
If you want to start the automatic TV channel search again,
then follow the instructions below.
aPress the MENU button on the remote control. The main
menu will appear.
bSelect the line ’Installation’ with the Bor
Abutton and confirm with the Cbutton.
cSelect the line ’Autoinstall’ with the Bor A
button.
6