Philips 32PFL4507, 26PFL4507 Use your TV, Switching on your TV and putting it in standby mode

4 Use your TV

Switching on your TV and putting it in standby mode

To Turn Power On or to Turn Standby On

•Touch or press . on the front panel or the remote control. Note

••Energy consumption contributes to air and water pollution.When the AC power cord is plugged in, your TV consumes energy.Your TV has very low standby power consumption.

14

Switching channels

English

Adjusting volume

To increase or decrease volume

• Touch VOL ◄(down) / ►(up) on the front panel or press VOL + / − on the remote control.

To mute or unmute sound

•Press MUTE on the remote control to mute the sound.

•Press MUTE again or VOL + / − to recover the original sound.

To select Channels by using CH ▲/▼ or CH + / −

•Touch CH ▲(up) / ▼(down) on the front panel or press CH + / − on the remote control.

To select Channels by using the NUMBER buttons

Digital TV operation

•For Digital channels, press a number followed by a dot “•” and the corresponding sub channel number.

––When selecting Digital channel 11.1

Be sure to press • before entering the subchannel number.

Analog/Cable TV operation

–– When selecting cable or Analog channel 11

Press PREV CH to return to the previously viewed channel.

Note

••To select the non-memorized channels, use the NUMBER buttons.

••No Signal will appear on the TV screen after the subchannel broadcast is over.

••Audio only program message will appear on the TV screen, when you receive only sound signal.