![](/images/new-backgrounds/1257212/25721221x1.webp)
AZ 2765 /17 page 11
DIGITAL TUNER
TUNING TO RADIO STATIONS
1.Press POWER to on position.
2.Press TUNER source button.
– The TUNER indicator lights up.
3.Press BAND once or more to select the desired FM/ AM waveband.
4.To tune to a radio station press SEARCH Á or ª for more than
1 second and release when the frequency in the display starts to change.
–The radio automatically tunes to a station with sufficient reception. Display shows Srch during automatic tuning.
5.Repeat step 4 until you find the desired station.
–To tune to a weak station, press SEARCH Á or ª briefly and repeatedly until the correct frequency is shown.
| POWER |
| English |
|
| AZ2765 CD RADIO | |
|
| CASSETTE RECORDE | |
| DBB |
| |
| SHUFFLE | CD |
|
|
|
| |
|
| TUNER |
|
B |
|
|
|
SHUFFLE | CD |
|
|
|
|
| |
| TUNER | TAPE |
|
|
|
| |
|
| PROG |
|
REPEAT | STOP |
|
|
|
|
| |
| SEARCH | PLAY/PAUSE |
|
|
|
| |
| DIGITAL TUNER | BAND |
|
To improve radio reception
–For FM, pull out the telescopic antenna. Incline and turn the antenna. Reduce its length if the signal is too strong (very close to a transmitter).
–For AM, the set is provided with a
6.Adjust the sound using VOLUME and DBB.
7.Press POWER to off position to switch off the set.
– The TUNER indicator goes out.
Programming radio stations
You can store up to a total of 29 radio stations in the memory.
1.Tune to your desired station (see Tuning to radio stations).
2.Press PROG to activate programming.
– Display: PROGRAM flashes.
3.Press PRESET 4 or 3 once or more to allocate a number from 1 to 29 to this station.
4.Press PROG again to confirm the setting.
–Display: PROGRAM disappears, the preset number and the frequency of the preset station are shown.
5.Repeat the above four steps to store other stations.
– You can overwrite a preset station by storing another frequency in its place
Tuning to preset stations
Press PRESET 4 or 3 once or more until the desired preset number appears in the display.
PROGRAM
TUNER
FM
11