Philips 27HT4000D, 27HT7210D owner manual Noise RE D Uction no / YES, · Audio OUT Fixed NO/ YES

TV SETUP MENU & SUB-MENUS (CONTINUED)

*BRIGHTNESS / COLOR / CONTRAST / SHARPNESS / TINT ( 0 - 63, TINT -31 - 31)

Adjust the respective picture setting using the Æ or Í cursor.

* NOISE RE D UCTION (NO / YES)

If NOISE REDUCTION is set to NO. The noise reduction feature is disabled.

If NOISE REDUCTION is set to YES. Video noise is reduced with minimum reduction in picture sharpness.

*SOUND MODE (MONO / STEREO)

Select either STEREO or MONO sound modes.

When SOUND MODE is changed, an on-screen display will appear indicating the actual audio status (MONO or STEREO). Note : If Stereo is not available on a selected show the sound coming from the TV will remain in the Mono mode even if the TV set to Stereo mode.

*AVL - Auto Volume Leveler (NO / YES)

When turned to YES AVL will level out the sound being heard when sudden change in volume occurs during commercial breaks or channel changes.

*SAP (NO / YES)

Disable or enable the Second Audio Program channel features. SAP is not widely used and most channels do not transmit a SAP signal. Use of the SAP channel include :

-Spanish translation or other language translation

-Descriptive information about the program

-Duplication of main audio (mono)

-Audio unrelated to program

Note : When SAP is set to YES, but SAP is not present on the current channel, the primary audio will be audible.

*BALANCE / TREBLE / BASS ( 0 - 63, BALANCE -31 - 31)

Balance : Level of sound coming from the left and right speakers.

Treble : Enhance the high frequency sounds.

Bass : Enhance the low frequency sounds.

Note : Adjust the respective audio playback setting using the Æ or Í cursor.

·AUDIO OUT FIXED (NO/ YES)

If AUDIO OUT FIXED is set to YES. MONITOR OUT audio level is set to a fixed nominal one volt peak-to-peak (0.775 volts RMS at 600 ohm), irrespective of the TV's volume setting.

If AUDIO OUT FIXED is set to NO. The MONITOR OUT audio level will vary with the TV's volume setting.

·SPEAKER MUTE (NO /

If SPEAKER MUTE is set to NO. If SPEAKER MUTE is set to YES.

YES)

The TV's built-in speakers will operate as they would normally. The TV's built-in speakers will be set to mute.

*INCREDIBLE STEREO (NO / SPATIAL / DOLBY VIRUTAL)

If INCREDIBLE STEREO is set to NO, there will not be any special audio effects applied to the TV sound.

If INCREDIBLE STEREO is set to SPATIAL the sound from the TV will be specially processed with audio spatializer algorithms, resulting in a "3D stereo-like" effect.

If INCREDIBLE STEREO is set to DOLBY VIRTUAL, the sound from the TV will be specially processed with patented Dolby audio algorithms, resulting in a "3D stereo surround" effect that conforms to the acoustic performance level as specified by Dolby.

* ULTRA BASS (NO / YES)

When ULTRA BASS is set to YES, the audio frequency equalization is modified such that the bass frequencies are significantly emphasized.

*VO LUME BAR (NO / YES)

When VOLUME BAR is set to YES, an OSD graphic appears providing visual verification (eg. "----15") of volume adjustments

made with the remote control or the front panel of the TV.

14