SOUND – USING THE AUDIO/VIDEO INPUT JACKS
AUDIO/VIDEO INPUTS
The TVÕs audio/video input jacks are for direct picture
and sound connections between the TV and a VCR (or similar device) that has audio/video out- put jacks.
NOTE: Repeatedly pressing the SOURCE button on the remote control will toggle the picture source from the current channel, the last viewed channel, then AV1 (or CVI) connection, then the AV2 connection, and then the AV3 connection.
24
8 |
|
|
|
| 8 |
+ | R | – | – | L | + |
SURROUND SOUND
BACK OF TV
1 |
Connect the VIDEO (yellow) cable to the VIDEO AV1 jack on the back of the TV. Then con- nect the AUDIO (red and white) cables to the AUDIO (left and right) AV1 jacks on the rear of the TV.
Connect the VIDEO (yellow) cable to the VIDEO OUT jack on the back of the VCR. Then connect the AUDIO (red and white) cables to the AUDIO (left and right) OUT jacks on the rear of the VCR.
Turn the VCR and the TV ON.
AV3
AV2
AV1
Monitor out | AV1 in AV2 in |
VIDEO
ANT 75Ω
Y
L
PbS-VIDEO
AUDIO
R
Pr
VIDEO IN (YELLOW)
AUDIO IN | 2 | |
(RED/WHITE) | ||
|
Press the SOURCE button
on the remote control until the AV1 source is selected. After AV1 appears, insert a prerecord- ed tape into the VCR and press the PLAY button to view the tape on the television. If AV1 did not appear, perform steps 5Ð9.
NOTE: the actions described in steps 5Ð9 are not illustrated on this page.
If AV1 did not appear onscreen as one of the choices available to you by pressing the SOURCE button, press the
M Link button on the remote control to display the
Press the CURSOR RIGHT or CURSOR LEFT button to highlight CVI.
Press the CURSOR UP but- ton to toggle from CVI to AV1.
Press the STATUS/EXIT button to remove the
Press the SOURCE button to
tune the AV1 source. You are now ready to view the VCR tape on the TV.
| SLEEP |
|
| POWER | BACK OF VCR |
|
|
| PIP |
|
|
| TV/VCR | ON/OFF | POSITION | FREEZE |
|
| A/CH |
|
|
|
|
| INCR. SURR. | SURF | SWAP | SOURCE | 3 |
|
|
|
|
| |
| SOUND |
| PICTURE |
| |
| MENU |
|
|
| |
4 | VOL | MUTE | CH |
| |
|
|
|
| ||
| SOURCE STATUS/EXIT | CC | CLOCK |
| |
| ITR/REC | HOME | HOME | PERSONAL |
|
|
| VIDEO | MOVIES |
|
|
| PROGRAM LIST | OPEN/CLOSE |
| ||
| OK |
|
|
|
|
NOTE: For more convenient direct playback con- nections, you can use your TV’s side video input panel, located on the right and angled toward the front for easy access. The audio/video jacks in this panel allow for quick connections that are especially handy for playing back camcorder (composite video or
R | L | VIDEO | ANT/CABLE | |
AUDIO OUT | OUT | OUT | OUT | |
VCR
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS)
If you are using a nonstereo device, use only the Audio R jack.
SIDE VIDEO
JACK PANEL INPUTS
VIDEO
L
AUDIO
R
36
