17
To select connected equipment
Use key to select
E1 (EXT1)
,
E2 (EXT2)
or,for S-VHS or Hi-8 equipment,
E2 Y/C
.
Most equipment (decoder,video recorder) carries out the switchover itself.
Headphones
To adjust the headphones vo l u m e,use the HEADPHONES adjustment in the S O U N D
m e nu (p.1 2 ) .To adjust the volume on the TV set,use the or keys.
You can also access the HEADPHONES adjustment directly using programmable keys
and on the remote control (see p.8).
Front connections
Carry out one of the following connections and then:
Use the key to select E2 (for VHS or 8mm cameras) or E2 Y/C (S-VHS or
Hi-8 cameras).
For a mono sound camcorder,connect the audio signal to the AUDIO L input.
Use the key to reproduce the sound on the left and right loudspeakers of
the television.
N.B.:If a peripheral is connected to EXT2, it is advisable to switch it off while using
a front S-VHS connection.
Amplifier
Use an audio connection cable and connect the Psockets "L" and "R" on
the set to the "AUDIO IN" "L" and "R" input on your hi-fi amplifier.