5
Tuning-in the TV channels
There are two ways the television can be tuned in :automatic store or
manual store (tuning - in channel by channel).

Automatic store

From the INSTALLATION menu ( and keys)
(after ensuring LANGUAGE and COUNTRY have been set correctly)
æSelect AUTO STORE ( keys) and press .
The AUTO STORE menu appears.Searching begins.
The TV set searches through the complete frequency range in your local
region and stores all the programmes it finds.The search operation takes
a few minutes.When the search is complete,the INSTALLATION menu
reappears automatically.
This TV set is equipped with an Easy Tune system which automatically
sorts the programmes by name.
ÂIf the transmitter emits the correct signal,the programmes are correctly
numbered.Go to page 7.
In certain cases,the system may ask you to indicate your local region using keys
to .
êIf no signal is emitted,the programmes will be numbered in descending
order starting from 99,98, 97,..Should this occur, the SORT menu should
be used to re-number the programmes.
If no picture is found,refer to the chapter entitled "Tips" (page 19).

Sort

This menu allows you to re - number the programmes in the order you pre fe r .
æSelect SORT( keys) and press .
The SORTmen u appears.The menu provides a list of all the programme
numbers with their names (where provided),or frequencies or channels.
ÂUsing the keys,select the programme to be re-numbered.
If,for example, you want to re-number programme 96 as 2:Select 96
using keys (or type ).
The number chosen (96) will appear in blue in the list.
êPress the key to enter.A yellow rectangle appears on the name of the
programme (or on its frequency or channel).
®Enter the new number using keys to .
In our example,type . Programme 02 appears.The number (02)
appears in blue in the list.
†Press the key to enter ( can be used to cancel).
The exchange of numbers is now complete.In our example, programme
No.96 has become No. 02 (and programme No.02 has become No. 96).
Repeat this operation for other programmes you wish to re-number

To exit from the menu

Press the blue key.