19
Tips

Poor reception

The proximity of mountains or high buildings may be responsible for ghost pictures,
echoing or shadows.If this is the case, modify the orientation of the outside aerial.
Check that the TV channel is tuned in corre c t ly or try using fine tuning:see "fine tuning" (p.6 ) .
The equipment connected to the TV gives a picture in black and white? Check that you
have selected the correct E2or E2 Y/C socket ( key).

No picture

Have you forgotten to connect the aerial socket? Have you chosen the correct system?
(p.6) Does your aerial enable you to receive broadcasts in this frequency range?
Poorly connected euroconnector cables or aerial sockets are often the cause of picture
or sound problems (sometimes the connectors can become half disconnected if the TV
set is moved or turned).Check all connections.

Picture adjustment

If you have trouble obtaining a clear picture,select one of the smart control presets
(p.8) and store using the STORE PP ALL function in the FEATURES menu.
The picture seems too red or too blue! Adjust the TINT (p.10).
In the event of difficult reception (snowy picture) switch the NOISE.REDUCTon
the PICTURE menu to ON.(p. 10).
The picture is badly adjusted? press the green key or re-adjust (p.10).
To reset the stored settings for each programme and return to the initial settings,hold
the green key down for 3 seconds.

No sound

If on certain channels you receive a picture but have no sound,this means that you do
not have the correct TV system.Modify the SYSTEM adjustment (p.6).
The left and right loudspeakers on the TV set do not work? Check that the external
loudspeakers switch has not been activated by mistake (p.18).
The Surround Sound loudspeakers do not work? For them to function correctly it is
essential that both loudspeakers are connected:check connections.
If in doubt,use the SOUND LEVEL menu (p.11) to check each channel.

Remote control

The TV set does not react to the remote control;the orange indicator on the TV set
no longer flashes when you use the remote control? Replace the batteries.

Standby

When you switch the TV set on it remains in standby mode and the indication
CHILD LOCK is displayed when you use the keys on the TV set? The child lock function
is switched on (p.12).
To save electricity it is advisable to switch the TV set off using the O N / O F Fkey on the
f ront of the set.If the set receives no signal for 15 mins,it automatically goes into
standby mode.

Still no results ?

If you have a problem with your TV set,never attempt to repair it yourself:contact
your dealer's after-sales service.

Recycling directive

Your TV set uses materials which are reusable or which can be recycled.
To minimise the amount of waste in the environment,specialist companies recover used
sets for dismantling and collection of reusable materials (consult your dealer).
19