Philips 3135 035 21372 setup guide Using the Installation Features, Language, Tuner Mode

OPERATING THE TELEVISION AND REMOTE CONTROL

REMOTE CONTROL

ADJUSTING OR SETTING MENU OPTIONS

Amenu is simply a list of options. You can adjust or set your TV’s on-screen menu options by pressing buttons on the

remote control. The following steps will familiarize you with how to use the remote control with the on-screen menu.

1 Press the TV mode button to ensure that the remote control is in TV mode.

2 Press the MENU/SELECT button to bring the menu to the screen. Then, as necessary, press the CURSOR RING DOWN or UP to highlight a menu option. Press the CUR- SOR RING RIGHT to enter the submenu for the option.

3 Within the submenu, press the CURSOR RING DOWN or UP to highlight an option.

Based on the submenu you are in, you can press the CUR- SOR RING RIGHT or LEFT to make an adjustment, select a setting, or enter a list or another submenu.

You can return to the submenu from a list by pressing the

CURSOR RING LEFT.

To go from a submenu to the previous menu, highlight the option at the top of the screen and press the CURSOR RING UP. You can also press MENU/SELECT to return to the previous menu.

Press STATUS/EXIT to exit the menu.

MENU

SOUND SUBMENU

PICTURE		TREBLE	SOUND
SOUND		BASS	TREBLE	30
FEATURES		BALANCE
			BASS
INSTALL		AVL
			BALANCE
		INCR . SURROUND
			AVL
			INCR .SURROUND
1		POWER	SOUND
			BALANCE
			AVL
			INCR . SURROUND
TV	VCR	ACC	HEADPHONE	MONO
SWAP	PIP CH	CONTROL FREEZE	STEREO
		ACTIVE
DN	UP
SOUND		PICTURE	OR
STATUS/		MENU/	STEREO	STEREO
EXIT		SELECT
			INSTALL SUBMENU
3	MUTE	CH 2	INSTALL
			LANGUAGE	AV3
1	2	3	TUNER MODE	AV4
			AUTO PROGRAM	1
4	5	6	CHANNEL EDIT	2
			AutoChron	3
7	8	9
TV/VCR	0
A/CH		SURF
POSITION		PIP	FEATURES SUBMENU
			FEATURES
Go from one submenu			TIMER	TIME
			AutoLock	START TIME
to another and make			PIP	STOP TIME
settings or adjustments.			CLOSED CAP	CHANNEL
			FORMAT	ACTIVATE

Make adjustments or selections within a submenu.

Also from a Submenu, enter a list to make selections.

INSTALL
LANGUAGE	AV3
TUNER MODE	AV4
AUTO PROGRAM	1
CHANNEL EDIT	2
AutoChron	3

TIMER SUBMENU

FEATURES

TIMER

TIME 8:06 PM

START TIME

STOP TIME

CHANNEL

ACTIVATE

HELPFUL HINTS

•If you don’t press any remote buttons, the menu will auto- matically disappear after about 20 sec- onds. To bring the menu back, press

MENU/SELECT.

•Sometimes not all the menu items are visible on the screen. If more items exist in the menu, a cursor arrow will appear. Also, a bullet will appear for each remaining item, up to a maximum of three. This will help you determine how many items are left in the menu. Keep pressing the CUR-

SOR RING DOWN until you display all items.

•Should your remote become lost or oth- erwise unavailable for use, you can use the buttons on the front of the TV to access the on- screen menu and make adjustments or settings. See page 2.

PICTURE	LANGUAGE
SOUND	TUNER MODE
FEATURES	AUTO PROGRAM
INSTALL	CHANNEL EDIT
	AutoChron

USING THE INSTALLATION FEATURES

LANGUAGE

The menu LANGUAGE control enables you to set the TV’s on- screen menu and on-screen displays to be shown in English, French, or Spanish. Follow the steps in this section to set the con-

trol.

1 Press the MENU/SELECT button. The on-screen menu appears.

2 Press the CURSOR RING DOWN repeatedly until INSTALL is highlighted. Then press the CURSOR RING RIGHT to enter the INSTALL submenu.

3 Press the CURSOR RING RIGHT again to highlight the menu LANGUAGE options list.

4 Press the CURSOR RING DOWN or UP to select your menu language.

Instantaneously, the on-screen displays appear in the lan- guage that you choose.

	PICTURE		LANGUAGE	INSTALL
	SOUND		TUNER MODE	LANGUAGE	ENGLISH
	FEATURES		AUTO PROGRAM
				TUNER MODE	FRANCAIS
	INSTALL		CHANNEL EDIT
				AUTO PROGRAM	ESPAÑOL
			AutoChron
				CHANNEL EDIT
				AutoChron
			POWER	INSTALL
				LANGUAGE	ENGLISH
				TUNER MODE	FRANCAIS
				AUTO PROGRAM	˜
					ESPANOL
	TV	VCR	ACC	CHANNEL EDIT
				AutoChron
			ACTIVE
	SWAP	PIP CH	CONTROL FREEZE
	DN	UP	3
5	SOUND			OR
				French

MENU/

SELECT

INSTALLATION

Make your selection and instantaneously the onscreen display appears in the language you chose.

Spanish

INSTALAR

HELPFUL HINT

The LANGUAGE con- trol makes only the TV’s on-screen menu items appear in English, French, or Spanish text. The control does not change the language of Closed Captioning (CC) text that may be included with programs.

5 Press the STATUS/EXIT button to exit the menus.

2,4	MUTE	1	LANGUE	FRANCAIS
	CH		TUNER MODE	ESPAÑOL
			PROGRAM.AUTO	ENGLISH
			CHANGER CANAL
			AutoChron

OR

IDIOMA	ESPAÑOL
SINTONIZADOR	ENGLISH
AUTO PROG.	FRANCAIS
EDITAR CANAL
AutoChron

1 2 3

4 5 6

TUNER MODE

Set the TUNER MODE control according to the type of signal you have connected to the TV—ANTENNA or CABLE. If you select AUTO, the

TV will automatically detect the type of signal you have connected.

1 Press the MENU/SELECT button. The on-screen menu appears. Press the CURSOR RING DOWN repeatedly until INSTALL is highlighted.

2 Press the CURSOR RING RIGHT to enter the INSTALL submenu. Then press the CURSOR RING DOWN once to highlight TUNER MODE.

3 Press the CURSOR RING RIGHT to highlight the TUNER MODE options list.

4 Press the CURSOR RING DOWN or UP repeatedly until you select the option that matches your signal con- nection, CABLE or ANTENNA. If you want the TV to determine the type of signal, select AUTO. (You have selected an option when the dot and triangle are next to the option.)

5 Press the STATUS/EXIT button to exit the menu.

6 Proceed to the section on “Auto Program.”

INSTALL
LANGUAGE		INSTALL
TUNER MODE	CABLE	LANGUAGE
AUTO PROGRAM	ANTENNA
		TUNER MODE	CABLE
CHANNEL EDIT	AUTO
		AUTO PROGRAM	ANTENNA
AutoChron
		CHANNEL EDIT	AUTO
		AutoChron
	POWER

	TV	VCR	ACC
			ACTIVE
5	SWAP	PIP CH	CONTROL FREEZE
	SOUND	UP	2,3
	DN

MENU/

SELECT

MUTE

4 CH 1

1 2 3

4 5 6

7 8 9

HELPFUL HINT

If you select the Tuner Mode option that matches your signal source rather than AUTO, the time required for AUTO PROGRAM to store channels to the TV’s memory can be reduced.

4