Philips 3139 125 33021 owner manual Hooking Up The Television, Cable /Cable Box Tv, Antenna Tv

HOOKING UP THE TELEVISION

CABLE/CABLE BOX TV Direct Cable Connection:

Your Cable TV input into your home may be a single (75 ohm) cable or use a cable box decoder. In either case the connec-

tion is very simple. Follow the steps below to connect your cable signal to your new television.

Direct Cable Connections:

Cable signal coming from Cable Company (Round 75Π coaxial cable)

This connection will supply Stereo sound to the TV.

1 Connect the open end of the round Cable Company sup- plied cable to the 75Π input on the bottom of the TV. Screw

it down finger tight.

L	Audio in (PC/HD)		75 Π	FM ANT	COMP Pr		Pb	Y
	HD input				VIDEO
					INPUT
R	Y	Pb	Pr		AVI	R	L
DCin(24V) PCinput(VGA)					in		Audio in	Video in

Jack Panel Bottom of TV

Cable Box (w/RF In/Outputs):

This connection will NOT supply Stereo sound to the TV. The sound from the cable box will be mono.

1 Connect the open end of the round Cable Company sup- plied cable to the cable signal IN(put) plug on the back of the Cable Box.

2 Using a separate round coaxial cable, connect one end to the

OUT(put) (TO TV) plug on the back of the Cable Box.

3 Connect the other end of the round coaxial cable to the 75Π input on the bottom of the television. Screw it down fin- ger tight.

NOTE: Be sure to set the OUTPUT CHANNEL SWITCH on the back of the cable box to CH 3 or 4, then tune the cable box on the TV to the corresponding channel. Once tuned, change channels at the cable box, not the television.

Cable Box with RF Inputs and Outputs Connection:

Output Channel Switch

Cable Signal

IN from the

Cable

Company

Round 75Π

Coaxial Cable

Jack Panel Bottom of TV

Jack Panel Back

of Cable Box

L	Audio in (PC/HD)		75 Π	FM ANT COMP Pr		Pb	Y
	HD input			VIDEO
				INPUT
R	Y	Pb	Pr	AVI	R	L
DCin(24V) PCinput(VGA)				in		Audio in	Video in

Cable Box (w/Audio/Video Outputs):

This connection will supply Stereo sound to the TV.

1 Connect the open end of the round Cable Company sup- plied cable to the cable signal IN(put) plug on the back of the Cable Box.

2 Using a RCA type Video Cable, connect one end of the cable to the Video (yellow) (or ANT, your cable box may be labeled differently) Out jack on the cable box and the other end to the Video Input on the bottom of the TV.

3 Using a RCA type Audio Left and Right Cable, connect one end to the left and right Audio Out L & R jacks (red &

white) on the cable box. Connect the other end to the Audio L & R Input jacks on the bottom of the TV.

NOTE: Use the SOURCE button on the TV remote control to tune to the AV1 channel for the cable box signal. Once tuned, change chan- nels at the cable box, not the television. Pressing the SOURCE button repeatedly will scroll all the AV Input channels, including the present- ly tuned channel.

Cable Box with Audio/Video Outputs Connection:

Cable Signal IN from the Cable

Company

Jack Panel Back

of Cable Box with A/V Outputs

							Audio Cables
Video Cable (Yellow)							L & R (Red, White)
L	Audio in (PC/HD)			75 Π	FM ANT COMP Pr		Pb	Y
	HD input				VIDEO
					INPUT
R	Y	Pb	Pr		AVI	R	L
					in
DCin(24V) PCinput(VGA)							Audio in	Video in

Jack Panel Bottom of TV

ANTENNA TV

Acombination antenna receives normal broadcast chan- nels (VHF 2–13 and UHF 14–69). Your connection is easy because there is only one 75Π (ohm) antenna plug on

the back of your TV, and that’s where the antenna goes.

1 If your antenna has a round cable (75 ohm) on the end, then you're ready to connect it to the TV.

If your antenna has flat, twin-lead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300- to 75-ohm adapter.

2 Push the round end of the adapter (or antenna) onto the 75Π (ohm) plug on the bottom of the TV. If the round end of the antenna wire is threaded, screw it down finger tight.

Antenna Connection:

Outdoor or Indoor Antenna (Combination VHF/UHF)

The combination antenna receives normal

broadcast channels 2-13 (VHF) and 14-69 (UHF).	Jack Panel
	Bottom of TV
300 to 75-ohm
Adapter

Twin

Lead Wire

L	Audio in (PC/HD)		75 Π	FM ANT	COMP Pr		Pb	Y
	HD input				VIDEO
					INPUT
R	Y	Pb	Pr		AVI	R	L
DCin(24V) PCinput(VGA)					in		Audio in	Video in

Round 75Π

Coaxial Cable

from Antenna

2