Philips 32HFL3330D Connect cables, Install the remote control batteries, Connect to an antenna

	3. Firmly pull the stand from the bottom of the
	TV. Place both the stand and bolts in a secure
ENGLISH	location for future reinstallation.
FRANÇAISE
ESPAÑOL	For 32HFL3330D/27, security screws are provided to
	secure the LCDTV stand to the table top.

Step 3 Connect cables

Connect the antenna cable, AC power cord and all other devices to the back of the TV as described in the following sections and in Section 8 Connect devices.

Step 4 Secure the VESA-compatible wall bracket to the TV

BB Warning

Only use the specified bolts (M6 x 10mm) to secure the VESA-compatible wall bracket to your TV. The specified bolts are designed to match the weight of your TV.

DD Note

Depending on your VESA-compatible wall bracket, you may need to separate the mounting plate from the wall bracket for easier installation. Refer to your VESA-compatible wall bracket documentation for instructions.

4.3Install the remote control batteries

	A
A	A
		A
A
	A

1.Open the battery cover on the back of the remote control.

2.Insert the 2 batteries supplied. Make sure the + and - ends of the batteries line up correctly. (inside of case is marked).

3.Close the cover.

4.4Connect the antenna or cable

This section describes how to connect your TV to an antenna, cable, Direct Broadcast Satellite, and to a cable receiver box.

CABLE

Connect to an antenna

Any DTV programs that are broadcast in your area can be received for free through an antenna connection.

EN-8