DVD Player or other accessory digital source devices
Devices with Component Video Output Connectors (YPbPr)
DIGITAL
AUDIO
IN
2
AV1/AV3
YPbPr
AV1
L & R
1 | 3 |
This TV is capable of displaying 1080i, 720p and 480p DTV signals when connected to a DTV tuner Set Top Box. Select the output of the Set Top Box to either 1080i, 720p or 480p. A DTV signal must be available in your area.
&Connect the three separate component video cables 1 to the device having component video outputs (YPbPr), such as Set Top Boxes, DVD- players,
•Connect to the Y, Pb and Pr jacks of AV1 in case of devices with analog audio signals.
•Connect to the Y, Pb and Pr jacks of AV3 in case of devices with digital audio signals.
éIn case of a device with digital audio, connect the audio cable 2 to the
DIGITAL AUDIO OUT of the device and to the DIG. AUDIO IN of the TV or to your Home Cinema system.
In case of a device with analog audio, connect the audio cable to the device’s AUDIO L and R 3 jacks and the L and R audio jacks of AV1.
DVD / STB
Devices with RGB output
AV1
H & V
2
AV1 | AV1 | |
YPbPr | ||
L & R | ||
|
3
1
DVD / STB
&Connect the device with RGB output with separate Horizontal and Vertical sync to the Pr/R Pb/B Y/G input 1 jacks and to the H and V jacks of AV1 2.
éConnect the audio cables to the L and R AUDIO jacks of AV1 3.
Notes
-If necessary, you can adjust the picture position to the center of the screen with the cursor keys.
-The labels for the component video sockets may differ depending on the DVD player or the device connected. Although the abbreviations may vary, the letters B and R stand for the blue and red component signals, respectively, and Y indicates the luminance signal. Refer to the DVD player’s or devices instructions for use for definitions and connection details.
-This television is designed to accept high definition signal standards 720p and 1080i as specified by the Electronic Industries Association standard EIA770.3. Digital devices from different manufacturers have the possibility of differing output standards which may cause difficulties for the television to properly display.
-Due to possible digital image distortion when displaying signals from connected digital equipment, and when having selected Digital STB in the Source menu, see p. 16, automatically the Auto picture setting Soft is selected, see Picture menu, Auto picture, p. 19. Changing this setting during reviewing will not be stored as Personal setting after switch off.
Warning: in case you notice scrolling images, wrong colors or no color, no picture, or even combinations of these on your screen, check if the connections are done in the correct way or move your digital device further away from your TV.
33
