Philips 32PFL3008H/12 user manual To switch the TV on, To switch the TV off, Aerial installation

Notifications, features and accessories Energy efficiency

This TV is designed with energy efficieny features:

•Power save mode (ECO): You can apply a combination of energy saving picture settings. While you watch TV, press the Menu button and, the Power Save Mode settings can be found in the ‘Picture’ section of the Main Menu.

•Picture off mode: If you only want to listen to audio from the TV, you can switch off the display. Other functions continue to operate normally. While you watch TV, press Menu and select Picture, and from there select ‘Picture off’ under the Power Save Mode option.

•Note: Disconnect your TV from the mains plug in case your TV is going to be inactive for a long time.

TV scroll button

The TV Scroll button on the side of the TV allows you to control the volume, change channels and put the

TV into standby.

To change volume: Increase the volume by scrolling up. Decrease the volume by scrolling down.

To change channel:

1.Press the middle of the scroll button, the channel information banner will appear on screen.

2.Scroll through the stored channels by pushing the button up or down.

To change source:

1.Press the middle of the button twice, the source list will appear on screen.

2.Scroll through the available sources by pushing the button up or down.

To switch the TV to standby: Press the middle of the button down and hold it down for a few seconds,

the TV will turn into standby mode.

Switching on/off

To switch the TV on

To switch on the TV from standby mode either:

•Press the “” button, CH- or CH+ or a numeric button on the remote control.

•Press the side function switch until the TV comes on from standby.

Note: If the TV has been left on and not been operated for a while, the TV will go into standby. When you next switch-on, the following message will be displayed. “Standby Cause No Operation” Press OK to continue.

To switch the TV off

•Press the ““ button on the remote control or press the side function switch until the TV switches into standby mode.

Note: To power down the TV completely, unplug the power cord from the mains socket.

First time installation

You will see the language selection screen when you first turn on your TV. Select your preferred language and press OK.

You can set up your TV by following the First Time Installation (FTI) screen.

Aerial installation

Select the AERIAL option from the Search Type screen to search for terrestrial digital TV broadcasts.

A channel list, which is generated by LCN (*), will be displayed on screen when the search is over. Select “Yes” and press OK to store this list.

Press “” button to quit channel list and watch TV.

(*)LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel sequence (if available).

Cable installation

Select CABLE option and press OK on the remote control. For automatic installation, select YES and press OK. You can also select frequency ranges from this screen.

Enter the frequency range manually by using the numeric button.

Note: Searching duration will change depending on the selected search step.

Play media files from a USB drive

You can play photo, music, and movie files stored on a USB disk by connecting it to your TV. Connect a USB disk to one of the USB inputs located on the

side of the TV. Pressing the“” button while in the Media Browser mode will access the Picture, Sound and Settings menu options. Pressing the “Media

b r o w s e r m e n u

English - 3 -