REMOTE USE- SEARCH METHOD FOR ACCESSORIES
The Search Method of programming your
remote can take as long as 12 minutes to
perform so we recommend you use it as a last
resort.
Please read all the steps below before begin-
ning.
1
Press the POWER button on the
device your are attempting to program
to turn it ON.
2
If programming a VCR or DVD type
product that has a STOPplay com-
mand, place a VCR Tape or DVD disc
into the device. Press the PLAY
button.
3
Place the TV/VCR/ACC Mode
Switch in the proper position. VCR for
programming Video Cassette Recorders
or ACC for all other accessory devices.
4
Press the VCR • RECORD and the
AUTOSOUND buttons simultane-
ouslyand hold them down.
As you continue to hold down but-
tons, the remote will run through its pro-
grammed code list with a command for
the VCR or DVD to STOPplay. Or, for
Cable Boxes and Satellite Receivers the
command will be to CHANGE
CHANNELS.
5
When the STOPcommand happens
release the two buttons.
Or for Cable Boxes and Satellite
Receivers, as soon as the channel
changes ONCE, IMMEDIATELY
release the two buttons.
VOL
07
08
07
08
STOP
STOP
STOP
STOP
3
4
5
4
5
5
2
1
2
5
DVD
Cable Box
Satellite
System
VCR
34