To select connected equipment
Press the v key on the remote control repeatedly, or select Source in the Setup menu (see p. 10) to select EXT1, EXT2, EXT3, Side or DVI according to where you connected your equipment.
Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on.
Recorder or DVD with EasyLink
The recorder or DVD can be operated with the remote control via the Recorder or DVD menu on screen.
Recorder
Òp ‡ π † ® Ï
Rwd Play Stop Play Ffw Rec Eject
DVD
Òp ‡ π † Ï
Prev. Play Stop Play Next Eject
&Press the MENU key on the remote control.
éSelect the Recorder or DVD menu with the cursor up/down.
“Press the cursor left/right, up/down to select one of the recorder or DVD functions.
The key ® for recording can be operated in the TV mode.
If your EasyLink recorder has the system standby function, when you press the B key for 3 seconds, both TV and the recorder are switched to standby.
Record with your recorder with EasyLink
In TV mode, it is possible to start a direct recording of the programme which is being displayed on the TV screen. Continue to press the ® record key on the remote control for more than 2 seconds.
Note: Switching programme numbers on your TV does not disturb recording !
When recording a programme from a peripheral connected to EXT1, EXT3 or Side, you can not select another TV programme on the screen without disturbing the recording.
22