Philips 37PF9975 manual Audio- and video equipment keys

Audio- and video equipment keys

B

VCR DVD SAT AMP CD

†

v Select

Ò ‡ π

®

This system remote control operates the following Philips equipment:TV,VCR, DVD, DVD/R, SAT (RC5/RC6), AMP (+TUNER), CD, CD/R.

Press the Select key to operate any of the equipment indicated in the display. Another device can be selected by pressing Select repeatedly within 2 seconds. The led will blink slowly to indicate the device.

Press one of the keys on the remote control to operate the peripheral equipment. To return to TV mode press Select while the led is blinking.

When no action is taken within 60 seconds, the remote goes back to TV mode.

æ	b	When you do not want the remote to go back to TV mode, and to stay in the
		mode selected, proceed as follows:
	OK	Select the desired mode with the Select key. Wait until no LED is lit. Press the
		Select key again simultaneously with the OK key for at least 2 seconds. The remote
		will not go back to TV mode from now on and will remain in the mode selected.
S	MENU	To go back to the default setting of the remote (TV mode) repeat what is explained
		above, selecting the TV mode.

+ +

V ¬ P

- -

Note: When the Select key is pressed and held for more than 2 seconds, the RC5/RC6 system select command is transmitted.

1 2 3

4 5 6

7 8 9

i 0 0

Active Control

b h q

Bto switch to standby

Sfor pause (VCR, DVD, CD)

®for record,

Òfor rewind (VCR, CD); search down (DVD, AMP)

‡for stop

πfor play

†for fast forward (VCR, CD); search up (DVD/AMP)

æto select your choice of subtitle language (DVD); RDS news/TA (AMP); to shuffle play (CD)

bto select a dvd title;

RDS display (AMP); info on screen (CD)

idisplay information

MENU to switch the menu on or off

-P+for chapter, channel, track selection

0 to 9 digit entry

0tape index (VCR), select a DVD chapter, select a frequency (AMP)

UVCR timer

Qsurround on/off (AMP, CD)

cursor up/down

to select the next or the previous disc (CD)

cursor left/right

to select the previous or following track (CD) search up/down (AMP)

Additionally the DVD, SAT and CD indicator can be programmed to operate the DVD-R, SAT (RC6), CD-R instead.

&Press the Select key repeatedly until no LED is lit.

éTo program DVD-R, press the OK key + digit 2.

To program SAT (RC6), press the OK key + digit 4. To program CD-R, press the OK key + digit 6.

From now on, when the corresponding (DVD, SAT, CD) indicator is selected, the remote control will operate your DVD-R, SAT (RC6) or CD-R.

Note: To return to the modes programmed in the factory, either remove the batteries for a few minutes, or press the OK key + digit 1 (DVD mode); or + digit 3 (SAT-RC5) or + digit 5 (CD mode).

23