Philips 40PFL8605, 37PFL8605, 32PFL8605, 52PFL8605, 46PFL8605 manual Troubleshooting / Devices

6.5Devices

HDMI connections

•The HDMI-HDCP procedure might take a few seconds before the picture from a device appears.

•If the TV does not recognise the device and there is no picture, try switching from one device to another and back again to restart the HDCP procedure. Or switch the device off and back on again.

•If sound interruptions occur persistently, see the user manual of the device to check the output settings. If that does not help, connect an additional audio cable.

•If a DVI to HDMI adaptor is used, check that an additional audio connection is in place to complete the DVI connection.

EasyLink HDMI-CEC

•Check if the connected device supports the HDMI-CEC standard and is properly set up. Read the user manual that comes with the device.

•Check if the HDMI cable is properly connected.

•Check if EasyLink on the TV and device is switched on.

•Make sure that the System audio control in your HDMI-CEC audio devices is properly set up. Read the user manual that comes with your audio device.

PC display

•The refresh rate of a PC connected to the TV with VGA or DVI to HDMI adapter should set to 60Hz.

•Check that the correct resolution mode is selected on your PC. See the list in Help > Specifications > Display resolutions.

78 Troubleshooting / Devices

Downloaded From TV-Manual.com Manuals