8A.ONCE A WEEK
8B.ONCE EVERY 4-8 WEEKS
9. HQ4 REPLACE- |
MENT HEADS |
10. IMPORTANT |
BATTERY |
R
1.Clean Razor Head Assem- bly as shown (Fig. 4).
2.Lift Razor Head Assembly using thumb and index finger to remove from razor housing (Fig. 5).
3.Clean inside of Razor Head Assembly and Hair Chamber with long bristles of brush.
4.Press Razor Head Assem- bly back on razor hous- ing.
5 |
IMPORTANT: Do NOT interchange the cutters and combs. They are a matched set and if interchanged may ad- versely affect shaving perfor- mance until cutters reseat them- selves. Therefore, remove, clean, and replace each set individually.
1.Remove Razor Head Assembly (Fig. 5).
2.While holding Razor Head Assembly in one hand, press center wheel down while turning counterclock- wise to release frame and
lift out. Set frame aside (Fig. 6).
3 . S l i d e o n e c u t t e r / comb, at a time, out of frame as shown (Fig. 7).
4.Cutter should be held as shown and brushed in an upward motion (Fig. 8). Clean inside of comb
with long bristles of b r u s h i n a c i r c u l a r motion.
6 |
5.For consistently close and comfortable shaves, razor heads should be cleaned and lubricated every
6.Replace cutter into comb section. Slide cutting head back into frame making sure that flat rim of cutting head slides under 2 clamps on frame.
7 |
8 |
7.Repeat procedure for other two cutting heads.
8.Replaceframe,with cutting heads in place, back into Razor Head Assembly. While press- ing down, turn wheel clockwise to lock frame into place (Fig. 9).
9.PressRazorHeadAssembly back on razor housing.
10.Spread Norelco Razor Lubricant, model AL80, or one drop of mineral oil over floating heads with your finger.
9 |
10 |
AND RAZOR |
ACCESSORIES |
Replacement Heads:
The
DO NOT USE shaver sharpeners as this will damage your blades and lifters and will adversely affect the shaving perfor- mance.
NOTE: It is recommended that you replace your razor heads once a year.
Razor Cleaners:
Norelco RAZORMATE Electro- sonic Heads Cleaner, model ERC100.
Norelco Razor Cleaner, model RC1776.
Norelco Razor Lubricant, model AL80.
Norelco Razor Accessories may be purchased at a store near you, an Authorized Norelco Service Location, or by using the handy order form enclosed.
DISPOSAL |
INFORMATION |
When discarding your razor:
THIS NORELCO RAZOR CONTAINS
Refer to enclosed instruc- tion sheet for directions on removing rechargeable bat- teries.
CAUTION:
■Batteries should be re- moved by consumer only when razor is to be discarded.
■Make sure razor is un- plugged before disman-
tling for battery removal.
■All servicing or battery replacement should be per- formed by an Authorized Norelco Service Location only.
60-Day Money-Back Guarantee
To enjoy the closest and most comfortable shave from your new Norelco Men’s Razor, the razor should be used exclusively for
The razor must be shipped prepaid by insured mail, insurance prepaid, and have the sales receipt, indicating purchase price and the date of purchase, enclosed. The razor must be post- marked no later than 60 days after the date of purchase. Norelco reserves the right to verify the purchase price of the razor and limit refunds not to exceed suggested retail price.
Send dated sales receipt, your complete name and address as indi- cated below, and the razor, prepaid to:
Norelco Consumer Products CompanyA Division of Philips Electronics North AmericaCorporation
P.O. Box 1116
Skokie, IL 60076Please allow
Please Print!
NAME:
ADDRESS:
CITY:
STATE:ZIP:
TELEPHONE NO.: ( | ) |
Area Code
REASON FOR RETURNING:
