21
English
Setting items Description
Color
enhancement
Off Sets Color enhancement to off.
On Makes colors more vivid bright colors.
Active control
Off Sets Active control to off.
On with
Light
Sensor
Adjusts backlight for the best picture quality by
dynamically adjusting the backlight intensity in
accordance with lighting condition in the room.
On without
Light
Sensor
Adjusts backlight for best picture quality based
on the incoming video signal.
Picture format
Automatic
Refer to ‘Summary of picture formats’ on
page 22.
Super zoom
4:3
Movie
expand 14:9
Movie
expand 16:9
Wide
screen
Unscaled
Mode selection
PC Turns off image enhancement features which
makes the TV to act purely as a monitor.
HDTV Enables image enhancement features to
improve picture quality.
Auto adjustment
The horizontal / vertical position, clock and
phase of the PC screen are automatically
adjusted.
Clock Setting to stabilize the PC screen.
Phase Setting to improve the clarity of the PC screen.
Horizontal shift Adjusts the horizontal position of the picture
for PC screen.
Vertical shift Adjusts the vertical position of the picture for
PC screen.
5 Press MENU to exit.
Note
• [ Mode selection] will not be displayed w hen incoming sign als are other th an
720 x 480p 60H z, 1280 x 720 p 60 Hz and 1920 x 1080p 24 / 30 / 60 Hz.
• [Di gital Natural M otion] (Available fo r 55PFL4706 only) If the i nput video cont ains
adjacent video fr ames with inh erent motion b lur captured by th e video camer a,
[Digital Natura l Motion] will inter polate blur an d cause streak ing artifa cts in high
motion scenes. I f the content you ar e watching cause s a lot of Interpola tion Induced
Blur Amplifi c ation, it is bes t to turn off [Digit al Natural Mot ion] temporarily.
• [Dig ital Natural M otion] (Available for 55 PFL4706 only) uses fr ame interpol ation
to make the video ap pear smooth whi ch causes a video la g of about 200
milliseconds. If you are using the TV for gaming or as a PC monitor DNM will
introduce lag. If y our gaming sys tem has a lag adjus tment featur e for your game
controller, use it to n egate the lag or el se turn off DNM fo r any applicatio n where
lag is an issue. If you r prefer to use DNM w hile watching mo vies on your Home
Theater PC (HTP C) and are using a n external Au dio Receiver for s ound output, s et
a 200 millisecond delay on your audio output for A/V sync. You will not experience
A/V sync iss ues for anythin g other than gami ng or HTPC applic ations since the T V
has internal A /V sync func tionality.
Changing picture and sound settings
You must set [Home] in [ Location]. (Refer to page 29.)
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes to standby mode.

Changing picture settings

1 Press MENU on the remote control.
2 Use
Î/ï/ Í /Æ to select [ Setup] > [ Picture].
Picture
Sound
Features
Installation
Software
Settings assistant Start now
Contrast
Brightness
Color
Tint
Sharpness
Color temperature Cool
Dynamic contrast Off
3 Use
Î/ï/
Í /Æ to select one of the picture settings, and press OK
to enter the setting.
4 Adjust the picture quality.
The following picture settings can be confi gured. Depending on
the format of the picture source, some picture settings are not
available.
Setting items Description
Settings assistant Use [ Settings assistant] to guide you through
the best picture settings.
Contrast Adjusts the intensity of bright areas, keeping
dark areas unchanged.
Brightness Adjusts the intensity and details of dark areas.
Color Adjusts color intensity.
Tint Adjusts the color balance in an image.
Sharpness Adjusts the level of sharpness in image details.
Color
temperature
Cool More blue tones.
Normal Standard tones.
Warm More orange tones.
Dynamic
contrast
Off Sets Dynamic contrast to off.
On Automatically enhances contrast in an image.
Digital Natural
Motion
(Available for
55PFL4706
only)
Off Sets Digital Natural Motion to off.
Minimum Reduces judder in video using low intensity
frame interpolation to make the video smooth.
Maximum Reduces judder in video using high intensity
frame interpolation to make the video smooth.
Noise
reduction
Off Sets Noise reduction to off.
On Reduces noise in an image.
MPEG artifact
reduction
Off Sets MPEG artifact reduction to off.
On Reduces a blockiness and a blurriness and
judder by digital filter.
EN