Select Static. Choose your preferred colour. The Ambilight static colours are fixed
Ambilight settings
More Ambilight settings are available in the Ambilight menu in TV settings.
To change these settings, press h, select SSetup and press OK.
Select TV settings > Ambilight.
Ambilight mode
When the TV is on, you can toggle with the AMBILIGHT key between the Ambilight modesOff, Dynamic and Static. Select Dynamic, if Ambilight should respond to onscreen images.
Select Static if you want to set a specific fixed colour.
Ambilight brightness
To set the Ambilight brightness, select Brightness and press OK. Adjust the light output of Ambilight.
Ambilight dynamic
To adjust the speed at which Ambilight responds to onscreen images, select Dynamic.
In Help, press *List and look up Ambilight dynamic for more information.
Ambilight static
To set an Ambilight colour of your own. The Ambilight static colours are fixed
In Help, press *List and look up Ambilight static for more information.
Wall colour
The colour of the wall behind your TV can influence the colour effect of Ambilight.
To correct this influence, select Ambilight > Advanced > Wall colour and select a colour that matches the wall colour. Ambilight will correct its colours to mix best with the colour of the wall behind the TV.
TV switch off
To set Ambilight to switch off immediately or to fade out and switch off a few seconds after you have switched off the TV, select Ambilight > Advanced > TV switch off.
Lounge light mood
In Help, press *List and look up Lounge light for more information.
Lounge light
When the TV is on standby, you can switch Ambilight on and create a Lounge light effect in your room.
To switch Ambilight on while the TV is on standby, press
AMBILIGHT.
To change the Lounge light colour scheme, press AMBILIGHT again.
To switch off Lounge light, press and hold AMBILIGHT for a few seconds.
You can also set up the colour scheme in the TV settings menu.
With the TV switched on, press h, select SSetup and press OK.
Select TV settings > Ambilight > Advanced > Lounge light mood. Select the colour scheme with which Lounge light will start up.
3.11
Universal access
Switch on
With Universal access switched on, the TV is set for use for hearing and visually impaired people.
Switch on
If you did not switch on Universal access during the installation, you can still switch it on in Setup.
To switch on Universal access, press h, select SSetup and press OK.
Select TV settings > General settings > Universal access. Select On and press OK.
With Universal access switched on in Setup, the Universal access option is added in the Options menu. With Universal menu in the Options menu, you can set specific settings for hearing and visually impaired people.
Hearing impaired
Some digital TV channels broadcast special audio and subtitles adapted for hearing impaired people. With Hearing impaired switched on, the TV automatically switches to the adapted audio and subtitles, if available.
Switch on
To switch on Hearing impaired, press oOPTIONS, select Universal access and press OK.
Select Hearing impaired, select On and press OK.
To check whether a hearing impaired audio language is available, press oOPTIONS, select Audio language and look for an audio language marked with a J.
TV / Universal access | 37 |
