Source
Source
Setup
EXT1
EXT2
EXT3
DVI-I
Side
Centre input
Centre in volume
This menu allows you to indicate the peripheral you connected to one of the external inputs.
&Press the cursor right to enter the list of types of peripherals attached to the selected input.
éSelect the peripheral device with the cursor up/down.
Once you have selected the source type, e.g. DVD, this source will automatically be selected when your remote control is in DVD mode, see p. 3, and when you press the v key on the remote control.
Centre input - Centre in volume
When you have connected a surround receiver to the TV, see p. 20, the loudspeakers of the TV can act as centre speaker, making a separate centre speaker unnecessary.
Select Centre input On.
When having selected On, you can adjust the Centre in volume with the cursor left/right to correct volume level differences of the external audio receiver and speakers.
Note: This is not the case with a Cinema Link surround receiver.
Decoder
Decoder
Setup 
Programme
Status
If a decoder or a descrambler is connected, see p. 19, you can define one or more programme numbers as decoder programme numbers.
&Select Decoder with the cursor right.
éSelect Programme.
“Select the programme number under which you have stored the programme coming from your decoder.
‘Select Status.
•Select the input used to connect your decoder: None, EXT1 or EXT2.
•Select None if you do not want the selected programme number being activated as a decoder programme number.
Note: Select EXT2 when the decoder is connected to your EasyLink recorder.
Demo
The Demo menu allows to demonstrate the TV features separately or in a continuous loop.
TV |
|
Setup |
|
Demo | Auto demo |
Install | ...... |
|
Dealer demo - Digital options - Light sensor
- 3D Y/C Comb filter
Note: Toggling through all the Ambilight modes will display each mode for 10 seconds each. Before switching to the next mode the light will first fade to off and then fade up in the next mode.
If Auto demo has been selected the demo will automatically present the features sequentially in a loop. Press one of the cursor keys to stop the Auto demo.
If one of the features has been selected, this particular feature demo will run only once, and the Demo menu will reappear.
Note: The Dealer demo is not part of the automatic sequence and can only be activated separately.
10
