8 Press OK to confirm your choice.
9 When done, press MENU to exit.
Manually install channels
This section describes how to search and store analogue TV channels manually.
1 Press MENU.
2 Select [Installation] > [Channel install.]
>[Analogue: Manual]
ÈThe [Analogue: Manual] menu appears.
Picture | Menu language | Channel assistant | |
Channel install. |
| Analogue: Manual | |
|
| ||
|
|
|
|
Preferences
Sound
Decoder
Factory settings
Features
Current software
Installation
3 Press to select the item you want to adjust.
•[System]
•[Search]
•
•[Store cur. chan.]
•[Store new channel]
Step 1 Select your system
Note
•Skip this step if your system settings are correct.
1 Press MENU.
2 Select [Installation] > [Channel install.]
>[Analogue: Manual]
ÈThe [Analogue: Manual] menu appears.
3 Press to select and enter [System].
4 Press to select your country or region.
5 Press OK to confirm.
6 Press MENU to exit.
Step 2 Search and store new TV channels
1 Press MENU.
2 Select [Installation] > [Channel install.]
>[Analogue: Manual].
ÈThe [Analogue: Manual] menu appears.
3 Press to select and enter [Search].
4 Press or use Numeric buttons to manually enter the three digit frequency.
5 Press OK to begin search.
6 Press when the new channel is found.
7 Press to select [Store new channel] to store the new channel under a new channel number.
8 Press to enter [Store new channel].
9 Press to select [Yes] and press OK to store the new channel.
10 Press MENU to exit.
Fine tune analogue channels
1 Press MENU.
2 Select [Installation] > [Channel install.]
>[Analogue: Manual].
ÈThe [Analogue: Manual] menu appears.
3 Press to select and enter [Fine- tune].
4 Press to adjust frequency.
5 Press OK when done.
6 Press to select [Store cur. chan.] to store channel number.
7 Press to enter [Store cur. chan.].
8 Press to select [Yes] and press OK to store current channel.
9 Press MENU to exit.
E n g l i s h
Downloaded From | EN 19 |