If the country is correct continue with step 2.
If the country is not correct, you need to start a reins tallation.
To start the reinstallation, press h, select S Setup and
press OK . Select TV settings > General settings > Reinstall
TV > OK. Select the correct country and skip the Search for
channels . Finish the ins tallation. When done, continu e with
step 2.
2 - Plug in the USB memory device that holds the channel list
of the othe r TV.
3 - To start the channel list upload, press h, select S Setup
and pres s OK.
4 - Select TV settings > General settings > Channel list copy
> Copy to TV and press OK. You might be asked to enter
the Child lock code of this TV.
5 - The TV notifies you if the channel list is copied to the TV
successfully. Unplug the USB memory device.
DVB-T or DVB-C
DVB-T or D VB-C reception
If both DVB-T and DV B-C reception is available in your country
and if this T V is ready to rece ive DVB-T and DVB-C for your
country, you have selecte d one or the oth er during the channel
installation.
If you want to change the DVB s etting to start a new channel
installation, press h, select S Setup and press OK.
Select Channel settings and press OK.
Select Channel installation > Antenna connection > Antenna
(DVB-T) or Cable (DVB-C) and press OK. Select the DVB
setting you want.
DVB-C channel installation
For eas e of u se, all DV B-C s ettin gs are set to autom atic.
If your DVB-C provider gave you specific DVB-C values, the
network ID or network frequency, enter these values when the
TV asks for them during installation.
It might be necessary to adjust the scanning (full or quick s can)
or en ter a spec ific s ymbol rate in th e Settings menu while
installing. To set a Symbol rate, first set the Symbol rate to
Manual.
Channel number conflicts
In some countrie s, different TV chann els (broadcasters) might
have the same channel number. While installing, the TV
shows the list with channel number conflicts. You need to
select which TV channel you want to install on a channel
number with multiple TV channels.
DVB-T + DVB-C
If you can use a DVB-T antenna input but als o a DVB-C input,
you can se t up your TV for both DVB-T and DVB-C. Install one
system followed by the other with the necessary settings.
Once each syste m is installe d, you ne ed to sw itch the antenna
input signal on the Antenna connection on the back of the TV
and s et the TV in the appropri ate sys tem to view the inst alled
channels on TV.
To select the DVB-T or DVB-C setting, see above.
DVB settings
Symbol rate mode
If your cable provider did not give you a specific symbol rate
value t o instal l the TV chann els, leave th e Symbol rate mo de
setting on Automatic.
If you received a spe cific symbol rate value, select Manual.
However, th e value you re ceived could be in the predefined
list of symbol rates already. Select Predefined symbol rates to
check if your valu e is avail able automatically.
Predefined symbol rates
With t he Symbol rate mode set to Automatic, the TV will
use 1 of the predefine d symbol rates as used by most cable
providers in your country.
Symbol rate 1
With t he Symbol rate mode set to Manual, you can enter the
symbol rate value you received from your cable provider. To
enter the value, use the number keys.
Symbol rate 2
With t he Symbol rate mode set to Manual, you can enter a
second symbol rate value you received from your cable
provider. To enter th e value, use the number ke ys.
Network freque ncy mode
If you intent to us e the fast Quick scan method in Frequency
scan to search for channels, select Automatic. The TV will use
1 of the predefined network frequencies (or HC - homing
channel) as used by most cable providers in your coun try.
If you received a spe cific network frequency value to search for
channels , sele ct Manual.
Network freque ncy
With t he Network frequency mode set to Manual, you can
enter here the network freque ncy value received from your
cable provider. To enter th e value, us e the n umber keys.
Frequency scan
Select the method of searching for channels. You can select
the faster Quick scan method and use the predefined settings
used by most cable providers in your country.
If this res ults in having no chann els installe d or if some
channels are miss ing, you can select th e extende d Full scan
method. This method will take more time to search for and
install channels.
TV / TV channels 29