6.5 Digital reception test
If you receive Digital TV broadcasting you can verify
the quality and signal strength of a specific channel.
‡Select a channel.
®Press Menu.
ÒSelect Setup > Installation > Channel
installation > Digital:Test reception.
†Press πto enter
ºPress OK.
◊Press the green key to start the test.
Information on the quality and the signal
strength of this channel is shown.
‹Use the cursor keys to change the frequency to
improve the signal or enter a new frequency
directly with the digit keys.
≈Press the green key to store the frequency if
the signal quality and strength are good.
ÚPress the red key to return to the Channel
installation menu.
œPress Menu to quit the menu.
àTip
To achieve the best results, contact a specialised
antenna installer.
6.6 Factory settings
You might want to return to the original factory
settings. Only picture, sound and Ambilight settings
will be reset.
‡Press Menu.
®Select Setup > Installation > Factory settings.
ÒPress π to enter the Factory settings menu.
†Press OK.
ºPress Menu to quit the menu.
30 Channel installation
2721.3 EN 23-06-2008 15:15 Pagina 30
Downloaded From TV-Manual.com Manuals