7.3.8Game console or camcorder The most practical connection for a mobile game console or camcorder may be at the side of the TV. You can, for example, connect the game console or camcorder to VIDEO/S-Video and AUDIO L/R connnectors at the side of the TV. A HDMI connector is also available for high-definition devices.

A permanent game console or camcorder can be connected to a HDMI connector or EXT 3 (component) connectors at the back of the TV.

7.3.9Personal Computer

Before connecting the PC:

Set the PC monitor refresh rate to 60Hz. See Section 8 Technical specifications for a list of computer resolutions.

Change the TV picture format to Unscaled as described in Section 5.3.4. Change picture format.

To connect a PC to the back of the TV

Using a HDMI to DVI cable or a HDMI-to-DVI adaptor (attached to a HDMI cable), connect a HDMI connector on the back of your TV to the DVI connector on your PC.

®Connect an audio cable from your PC to the AUDIO IN mini-jack connector at the back of the TV.

rNote

You must assign the AUDIO IN mini-jack connector to the HDMI connector as described in Section 7.4.3 Assign the AUDIO IN mini-jack connector.

7.4Setup devices

When all devices are connected, you must select the type of device attached to each connector.

7.4.1Assign devices to connectors

For easy selection and best signal handling, assign the device connected to the connectors on your TV.

Press Menu and select TV menu > Installation > Connections.

®Press π to enter the list.

ÒPress œ or o to select a connector.

Press π to enter the list.

Connections

EXT 1

 

 

EXT 1

None

EXT 2

DVD

EXT 3

Blu-ray

HDMI 1

HDD/DVDR

HDMI 2

HD rec.

HDMI 3

Game

Side

VCR

...

...

ºPress œ or o to select the device attached to the connector.

Press OK to select the device.

Repeat the procedure until all devices are correctly assigned to connectors.

Press Menu to exit.

34

Connections

Page 36
Image 36
Philips 47PFL5603, 42PFL5603, 32PFL7403 manual Setup devices, Personal Computer, Assign devices to connectors