Philips 42PFL7603D, 47PFL7603D Connect the power cord, Manage cables, Español Française English

ESPAÑOL FRANÇAISE ENGLISH

•YPbPr (Component Video Input)

•HDMI

For information about how to connect a set-top box, see the Quick Start Guide provided.

Connect a set-top box through RF IN/OUT

If the TV is connected to a cable box or satellite set-top box via a coaxial connection, set the TV to channel 3 and 4, or the channel specified by the service provider.

Connect a set-top box through component video input or

HDMI

	R	R	R	SERV. U
	L	L	L
				SPDIF
	Pr	Pr		OUT
	Pb	Pb	VIDEO	L
			S-VIDEO
	Y	Y		R
	AV 1	AV 2	AV 3	DVI AUDIO
				IN
HDMI 1	HDMI 2			HDMI 3

3.4Connect the power cord

BBWARNING: Verify that your voltage corresponds with the voltage printed at the back of the TV. Do not insert the power cord if the voltage is different.

To connect the power cord

1.Locate the power connector at the back of the TV.

The location of the power connector varies according to TV model.

2.Insert the power cord fully into the TV power connector.

3.Connect the power cord plug to the power outlet. Ensuring that the cord is tightly secured at both ends.

To disconnect the TV from the power outlet

The TV set is always connected to the power.You can disconnect the TV from the power by doing one of the following tasks:

•Unplug the power cord located at the back of the TV.

•Unplug the power cord from the power socket outlet.

Pull the power cord by the plug - do not pull on the power cord.

3.5Manage cables

Route your power cord, antenna cable and all other device cables through the cable holder at the back of the TV. This holder helps keep your cables tidy and easily manageable.

EN-8

Downloaded From TV-Manual.com Manuals